Ran into a couple small bugs on xbox.
When making a potion the game crashed. After repeating it multiple times, I figured out that it only happened when mixing a stolen and non stollen ingredient. I have not retested since the last update.
Prior to the update, I could not create an enchanted item with a static effect at frostcrag spire. For example, a ring with nighteye. I could create one with detect life because it was a magnitude selector. This bug went away after the update.
That’s a good sized heater. It could be filled with sediment and not working efficiently. If you haven’t emptied it recently, it might be worth it.
If it’s clean, you can try turning it up. It will make full-hot from your faucet hotter, so be careful of scalding yourself, but it will make the hot water last longer.
You could also get a slightly lower flow shower head. Using less water at a time will allow it to last longer and keep do better keeping up with the empty rate.
If none of that works or is something you want to try, you could always replace with a tankless and never run out. Though you’ll waste a bit more water each time you turn on the hot since it takes a few seconds to kick in, but you won’t run out.
If it’s raining, there’s snow on the ground, or many other low traction scenarios, the cop would have to really want to pull you over. Chances are they won’t.
On a clear, dry day, depending on where you are, barking your tires is a violation of nuisance laws. Again, most likely not getting pulled over unless you consistently did it.
Now, if you stomped on it and your tires broke loose, you are looking at reckless operation of a motor vehicle. Expect to be stopped.
It mostly comes down to conditions and level of egregiousness… and how bad of a day the cop is having / wanting you to have.
I was excited for the new season and planned on rewarching seasons 1 and 2 before beginning 3. Last weekend, I started s1e1 and was in the middle of a dark, suspensful scene when it cut to a bright white ad with loud music. Talk about immursion breaking. I guess paying $130+ a year for Prime isn’t enough for Amazon.
I closed the app and now have zero desire to watch s3. It’s not worth paying even more to get rid of ads that shouldn’t be there to begin with. Amazon isn’t making more money with the ads, they are making one less person watch the show.
Yeah, let’s do nothing and let the children of people we don’t like die. And in the meantime, let’s put other particularly vulnerable - like the immunocompromised - at risk. But we’ll sure show a handful of people how right we were the whole time.
You might want to rethink your moral compass.
Sometimes, the best you can do is explain a bad decision when you see it. The people who really want to do it will ignore you. The hope is to get the people on the fence to not do it. You won’t get them all, but if it saves even one child, it’s worth it.
“The government” is multiple agencies and departments. There is no single computer system, database, mainframe, or file store that the entire US goverment uses. There is no standard programming language used. There is no standard server configuration. Each agency is different. Each software project is different.
When someone says the government doesn’t use sql, they don’t know what they are talking about. It could be refering to the fact that many government systems are ancient mainframe applications that store everything in vsam. But it is patently false that the government doesn’t use sql. I’ve been on a number of government contracts over the years, spanning multiple agencies. MsSQL was used in all but one.
Furthermore, some people share SSNs, they are not unique. It’s a common misconception that they are, but anyone working on a government software learns this pretty quickly. The fact that it seems to be a big shock goes to show that he doesn’t know what he is doing and neither do the people reporting to him.
Not only is he failing to understand the technology, he is failing to understand the underlying data he is looking at.
My guess is that the label is wrong. My water bill has the same chart with about double the usage as yours, but same ranges. On mine, the label is “gal (in hundreds)”. I’m betting that some developer just didn’t put the full label on the screen.
He didn’t even work for the company, his wife did. She had him record the lines on a tape recorder in their livingroom. She sold it to the company for a few hundred dollars.
Best audio book I’ve listened to… Dungeon Crawler Carl. Great story. Amazing audio book production.
I agree with what you’re saying. They got the phone from Carrier A with the expectation the phone plan went with it. Once the phone is paid off, they can take the phone to Carrier B. Since they phone is basically bought on an interest free loan, the interest is recouped by the plan, and the collateral for not paying is a loss of the phone plan and use of the phone. To leave the plan, payoff the phone.
That does require that, the moment the phone is paid off, it should be automatically unlocked. There shouldn’t have to be a request or additional waiting. And the customer should be notified that it’s unlocked along with an explanation that they can now use the phone with any other provider.
I had one done recently due to breaking a filling while eating a Jolly Rancher. The whole thing took maybe 2 hours.
The shot of novocaine to numb my jaw was the only pain, and even that wasn’t bad because the dentist used topical numbing before that. It was no different than getting a cavity filled.
My dentist has a cnc machine (CEREC) in the office to make the crown, so I didn’t need a temporary cap. Waiting for that to be milled was the longest part.
I had a bruise on my gums for a couple days from the shot and the retainer clamp, but it wasn’t even bad enough to stop me from eating.
This was occurring for me also since 9/20. I deleted all cookies on chatgpt, reloaded the site, and logged back in. It would work for 20 to 30 minutes then do it again. Each time, the browser console would have a ton of 503 errors.
It seems that some of their nodes are working and some are in failure state. Their load balancer is occasionally directing to failed nodes.
Historically, this is exactly how theological disputes were handled. See Crusades on Wikipedia for more information.
If that were the case, how did you know to post about it?
If you’re getting water inside, Jchannel is probably the least of your concerns. Something isn’t sealed correctly. Unfortunately, if you have water getting in, you have water in your wall. Even if you seal the window, you could end up with a mold issue.
If it was me, I’d pull the window, ensure all flashing and housewrap is in place, the reseat the window in a thick bead of silicone. Assuming the window is still in good shape. Otherwise, a new window is needed. Once the window is in place, trim, jchannel, and siding would be put back.
Once the window is properly installed, I’d focus on the inside. Pull the trim and drywall around the window, letting it air out for a day then coat the inside sheeting with mold killing primer. New insulation would be added before new drywall is put in. Then mud, sand, paint, and reinstall the trim.
It’s a decent amount of work, but not insurmountable. My concern is, if it was installed incorrectly, chances are, your other windows were too. I’m not trying to be doom and gloom here, just trying to forewarn you. It’s something to keep an eye on.
All of this is assuming the problem isn’t something like a window left open or something like that.
Thanks Sata . . . What the fuck is wrong with you? Who hurt you? You will live rent free in my head for a long time. Just so you know, I hate you for that. You magnificent bastard, you. Bravo. Bra fucking vo. 👏👏
The silver things are runners with ball bearings that drawer slides on. The slides that attach to the drawer will snap into these silver runners.
Usually, you just need to align the slides on the drawer with the runners and push. They should snap in. The runners tend to slide around while connecting them. If they slide to the back, it’s ok, they will still connect once you get them lined up and push the drawer into them. If you can reach from underneath, you can hold the runner in place while attaching the drawer. Do one side at a time.
If you’re struggling to get it to connect, I recommend removing the slide from the side of the drawer and seeing if you can get a single slide to attach to the runner. It will click when it attaches. By doing just one, you might have an easier time seeing how it connects.
Once you figure it out, you’ll need to disconnect it. There should be a little plastic lever that you hold down (or up, depending on the side) while you pull out the slide. Put it back on the drawer and see if you can connect it once it’s back on the drawer.
They are a little complicated, but once you see how it goes together, it should make sense. If what I said is still confusing or if you are still struggling, reply and I’ll see if I can get some pictures to explain it better.
I get why people are upset by the headline. It is written to provoke anger. Unfortunately, anger at the wrong issue.
I understand the argument that a large company can absorb the cost of workers they don’t currently. Though it’s unrealistic to expect them too.
I lived in the Quad Cities for a number of years. A large majority of people I know, both family and friends, worked for either Deere or Case IH - until they closed the plant in East Moline.
Layoffs are a yearly thing. Deere, Case, Caterpillar, they all hire a bunch of people in the beginning of the year and lay them off towards the end. It’s typically around August or September, and they announce it in July. Everyone in the Quad Cities knows it. It is expected. Sometime early next year, they are going to hire these jobs back. The people who take these jobs go into it knowing this is going to happen.
It can suck being let go and some people might struggle with it. Those who are used to this cycle treat it as a well-paying seasonal job. Many already have something else lined up. This is only a single, anecdotal, data point, so take it with a grain of salt… one of my uncles works for Deere and is a bus driver for one of the school districts. He knows Deere is going to let him go by fall so he has the driving job for the rest of the year. In spring, he will go back to Deere.
Perspective is also important. Deere has somewhere between 80k and 85k employees. They are laying off < 1000 based on this story. That’s the equivalent of a small, 80 person company hiring 1 person to get through the holiday season, then laying them off in January. Next year, they will do it again.
Headlines like this are nothing more than a distraction from real issues. For example, why does any company have multi-billions of dollars in profit to begin with? It just means they are charging more than they need to. The farmers who buy Deere equipment then have to charge more for their produce. Which means the stores have to charge more. Which means we pay more for our food. Deere’s profits are leading to higher food prices for everyone. To me, that is more of an issue than 1/80th of their workforce being in a hire/layoff cycle.
I have, conservatively, two dozen playthroughs under my belt at this point, including the original trilogy and remastered versions. If I had to guess, I’d say im about an 85/15 split FemShep over MaleShep. Apparently I’m in the minority, but I much prefer Hale’s performance.
I’m curious as to the paragon vs renegade percentages for each character type. As in, do more people play FemShep as paragon or renegade? Same for MaleShep.
If the AI overlord wanted me to, I’d do it for a magical pedicure kit and a toe ring of the Splatter Skunk.“Time to pay the daddy tax,” as Princess Donut said