Thanks for your help! Looks almost identical, but not exactly! The little plastic tabs on the edge are a bit further apart on the connector you send me. Or at least that’s what it looks like on pictures I find:
Here the little plastic tabs are roughly above pin 1 and 5, on my connector it’s more above pin 2 and 4… Hope you can understand what I mean. Any idea?
That seems to be it! Or “JST-PH”? Not sure what the difference is between PH and PHR-5. 2mm pitch seems to be it at least, and plastic tabs seem to be at the right place:
(Backside of PCB from pictures before)
Just order some of the generic ones I find for " JST-PH" on aliexpress and pray? You are a great help, thank you!
As far as I know are the “PHR” series connectors a variant of the “PH” connectors. They also have a 2.0 mm pitch, but they differ slightly in their housing design. The primary difference in the “PHR” connectors is the presence of a latching feature on the housing. This latch helps to secure the connector halves together, providing additional stability and preventing accidental disconnections.
Thanks for your help! Looks almost identical, but not exactly! The little plastic tabs on the edge are a bit further apart on the connector you send me. Or at least that’s what it looks like on pictures I find:
Here the little plastic tabs are roughly above pin 1 and 5, on my connector it’s more above pin 2 and 4… Hope you can understand what I mean. Any idea?
That’s true. Maybe a PHR-5 JST Connector 2mm Pitch instead?
Source: https://uk.rs-online.com/web/p/wire-housings-plugs/8201472
That seems to be it! Or “JST-PH”? Not sure what the difference is between PH and PHR-5. 2mm pitch seems to be it at least, and plastic tabs seem to be at the right place:
(Backside of PCB from pictures before)
Just order some of the generic ones I find for " JST-PH" on aliexpress and pray? You are a great help, thank you!
Found these over at Amazon: https://amzn.eu/d/6HDzJIR
Can’t say for sure if it’s a full match, but as far as generic goes - maybe this is faster than waiting for AliExpress at least.
As far as I know are the “PHR” series connectors a variant of the “PH” connectors. They also have a 2.0 mm pitch, but they differ slightly in their housing design. The primary difference in the “PHR” connectors is the presence of a latching feature on the housing. This latch helps to secure the connector halves together, providing additional stability and preventing accidental disconnections.
Check out this page: Common JST Connector Types – Matt’s Tech Pages
farnell.com | PHR-5 Technisches Datenblatt
I ordered some of these:
With a little bit of luck it should be an easy repair. Thanks again!