So I’ve been getting the occasional BSOD and it recently started getting a bit more frequent, so I decided to run a memtest86 over night to check if it’s maybe the RAM causing it.
I got 1 error, so then I tested each stick, 1 by 1 (every new stick I would test I also put in a different slot) but I only tested first 3 sticks, thinking that the last one is faulty, since they all passed the test, but yesterday I decided to test the last one as well and that one passed as well. So now I’m confused, not sure what to do…
I was running on 3 sticks for 2 days and I didn’t get BSOD, but that still means nothing because it was rare occurrence anyways.

Should I test all of the sticks again? Is there a better test I should be using instead?

(RAM is not OC’d btw)

  • WistfulOP
    2·
    5 hours ago

    I have not been following PC hardware for a while, but there was a time when RAM slots and the sticks themselves were designed to be used as a pair. Could be something like that?

    Hmm, never heard of that. I’ll research it a bit.

    Also since it’s occasional, could also be corrupted OS file, harddrive/SSD read issue or even a driver issue. Have you looked what errors are in the event log with the BSODs? Is it same or similar each time or completely random?

    It is always the same thing. And it is entirely possible that OS is causing it, since the installation is old af, but now my bigger concern is that initial RAM test fail.