I was wondering if anyone could point me in the direction of an external SSD that’d last me a while being plugged into my incredibly simple SBC home server. I’ve done a bit of research but haven’t found much information about USB-connected SSDs and their longevity in terms of 24/7 use.
Some More Specifics What I’m aiming to do is use this drive as NAS that I can access on my home network, it’d mostly be used for syncing backups from devices, but would also probably get use as a general-purpose file storage solution. Basically, it’s going to be plugged into my little Raspberry Pi all the time, but will only be used sporadically and generally won’t be writing huge amounts of data at a time.
Given the above information, are there any external SSDs you could recommend for this application? Or am I worrying too much and should just buy your average Samsung/Kingston/WD/Seagate etc.?
Edit:
Thanks for the advice everyone, that was quick and helpful! The solution I’m gonna go with is a USB caddy/housing to hold a standard internal HDD, so hopefully this is helpful for anyone else in a similar place with a simple home server like mine.
A NAS is a standalone device that uses low power and solves your problem, but is expensive (synology, openNAS etc) an external drive is not a NAS it’s an offline backup (a worthy thing, and perhaps your priority for data integrity / an actual backup). As Asked, get an external USB3 caddy for drives and any well reputed SSD, Crucial, Samsung ,etc…
Ah right it seems I made the assumption that Network Attached Storage meant any storage attached to my networked device haha, thanks for the clarification. I like this idea, forgot about the option of USB drive caddies. Thank you!
Which is kinda correct.
Set your SBC up to run something like TrueNas or OMV6 and you have a DIY NAS.