First ever build was the Spectre SI15. Build guide said to melt a brass threaded insert into the lower. That way the pistol grip would be screwed into metal instead of plastic.
Reading the Ubar3 guide, Ivan chose to tap threads into the lower. I trust Ivanās judgement because heās been polishing the ubar for 10ish years. In my mind thoughā¦ the brass threaded insert seems like itād be stronger since itās metal on metal. Harder to strip out the threads etc.
Thing isā¦ with Ivanās method you can use the actual screw thatās meant for the pistol grip. If you use the threaded brass insert. Itās a much smaller flanged screw. Iām not sure what to think.
Would appreciate thoughts/advice.
So youāre saying modify the STL so that it accepts an M5 nut? I just learned Meshmixer, so I could probably do it. I would just have to figure out how to get the measurements/dimensions right.
Find the nut on https://www.mcmaster.com/ (for example https://www.mcmaster.com/products/nuts/hex-nuts-5~/hex-nuts-2~~/system-of-measurement~metric/thread-size~m5/). Click on the part number to bring up the detail window and youāll see a CAD Download button. Select ā3D-STEP No Threadsā and click āDownloadā. You can load the downloaded STEP file directly into your slicer as a āNegative Partā. Position it where you want it and youāll get a recess the correct size and shape.
If the fit is a little tight when you install the nut (this method gives you no extra tolerancing), just heat the nut with a soldering iron like you would a threaded insert and it should easily press into place. Alternatively, you can scale the negative part up a few percent in the slicer to create some tolerance. Test by adding the scaled negative to a simple cube and iterating on that until you get the fit where you want it.
Dangggggg McMaster Carr is bad ass. Iāve made a few purchases from them and never noticed you could do that.
Iāll probably just go with a m4 or m5 screw/nut so I donāt risk weakening the lower by removing too much material.
Hypothetically though, If I wanted to use the original ar screwā¦ā¦ From what Iāve gathered, most ar grip screws are 1/4ā-28 fine unf. So that means Iād need a 1/4ā- 28 fine unf nut?
Iāll probably use m4/ m5 screw/nut to minimize risk of weakening the fin by removing too much material. Smaller screws make me a tad nervous though.
Pretty sure my wrist will fail long before a decent quality M5. A grade 8 M5 is rated for over 2500 lbs of tensile force.
Awesome thanks for the reassurance. Now I just need to check if mine are grade 8.
I do it with STEP files in Fusion, Iām not familiar with other programs. What frame are you working with?
The ubar3. I checked and it can be done in Meshmixer. I found the nut I need. Is Fusion offline/ free? I only chose Meshmixer because it was.
https://odysee.com/@Sticky:9/UBAR3-with-internal-grip-nut:d
Fusion has a free version.
Didnāt realize you provided a whole remix with the m5 already placed. Thank you.
Okay thank you. If itās able to be used offline. I may make the switch.
Could also use a square nut and negative object in your slicer if in a hurry.
So I read into it. Ivanās read me says he didnāt use brass threaded inserts because his tests showed the inserts removed too much material which made the print weakerā¦ im not sure if heās using the original screw that came with the grip or not. I think could use a m4-m5 screw and it would solder right into the preexisting hole? Itās a much smaller screw though. Not sure if thatād make it weaker.