Hello all. I am very new to this but it is all very cool to me. I ran into a problem and I am not sure how to troubleshoot it. I downloaded a simple pull string helicopter off thingiverse. After running through the slicer software, the estimated build time is 131 hours. Relative to it’s size this seems insane. If I “run the simulated build”, there are long holds on one of the interior walls. I am hesitant to just “try it” and see if the pauses are a software thing that does not translate to the hardware. I am not sure how to break it down from here. Any advice?

Link to the plans included

  • Creat
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    7 months ago

    I’m sure the official slicer will have a good profile, maybe the speed for outer walls accidentally got changed to 1 mm/s? I don’t usually use Cura (that is what their slicer is based on), but I think to change speeds at all you need to hit “show advanced” or something? So if you didn’t change anything, that is even less likely.

    If it’s real pauses (print head stops completely), I have even less ideas what that could be.

    When I get back home I can try to see what I get with your settings, probably just resetting everything should also work for you though.