Storing electrons in a container

Maybe like how can fill a container with a gas like air could maybe do the same with each individual electron in a container.

Could perhaps emit each electron into a container maybe like how an electron emitter / electron gun can emit each electron from the negative electrode. Then maybe can be able to emit each electron into a sealed container to store each electron not attached to an atom. I guess an electron not attached to an atom are as a free electron. Which maybe can call this an electron bottle.

Should probably have the entire inner surface of the container be made out of a conductive material so can maybe be able to both add each electron into the container and to remove each electron from the container. Should probably ensure have an electrically insulative material surrounding the conductive surface so as to prevent emitting each electron outside of the conductive surface. With removing each electron should maybe have a diode to ensure each electron move a specific direction.

If for some reason each electron can go through the container then maybe should use a material for repelling magnetism maybe like a diamagnetic material like a superconductor or something else like pyrolytic graphite or bismuth. This way can perhaps repel magnetism of each electron which then perhaps repels each electron. A superconductor perhaps have a stronger repelling effect compared to something like pyrolytic graphite and bismuth. Which also perhaps pyrolytic graphite have a stronger diamagnetic effect than bismuth.

  • Maybe could even use something like copper or aluminum to maybe be able to repel each electron from each electron’s magnetism causing eddy currents with either type of material.

  • Maybe could even have a material that both repel magnetism like as a diamagnetic material and are easily able to make eddy currents perhaps due to being electrically conductive. Maybe like a superconductor or maybe pyrolytic graphite. I’ve heard bismuth are a superconductor around -273.15 C or -459.67 F. However perhaps at higher temperatures I guess bismuth lose electrical conductivity perhaps so perhaps like at room temperature 23 C or 73.4 F have very high electrical resistivity so are not ideal for eddy currents.

Which then with using a material for repelling each electron then it might be more difficult to be able to collect each electron. Could probably have a section of the electron bottle with no or at least less of a magnetism repelling effect which are as a conductive surface. Which then to perhaps have something like a removable magnetism repelling material, diamagnetic material behind on the outside of the conductive surface with less or no magnetism repelling effect. This way if the diamagnetic material are in the section with no or less magnetic repelling effect then maybe to repel each electron inside of the container. If to remove the diamagnetic material then maybe to allow each electron to conduct into the conductive surface which then perhaps can be collected.

Electron bottle: Energy generation

Another thing to mention is maybe since each electron always move maybe like with zero point energy then can maybe be used for generating energy.

Maybe for example since each electron emit electromagnetism then perhaps each electromagnetism could affect the conductive surface area to cause current and maybe even go through the electron bottle so can perhaps affect a coil to cause current that way. This way maybe can collect electric current without removing each electron. Though with just collecting current from the inner conductive surface then probably to have a higher chance of collecting each electron and perhaps especially more likely if the conductive surface does not effectively repel each electron.

Maybe either way if effectively repel each electron or not could maybe cause heat which can also maybe be another way to be used for energy. Maybe the heat could power a thermoelectric generator for electric current. Maybe even emit infrared light could power an infrared solar panel for electric current that way.

Also just to mention the conductive surface with the electron bottle that can perhaps act as an electrode like as a negative electrode to emit each electron in the container. I guess in order to effectively emit each electron should be heated up. So maybe another idea how how it could heat up is just by each electron inside of the container itself could perhaps heat up the container. Maybe like magnetism from each electron can heat up the conductive surface.

Maybe another idea could be to collect each electron to for example use with a circuit and then add each electron back into the container. Though this might have a higher chance of losing each electron being emitted from a circuit.

Below ideas regarding how to maybe affect each electron to move at a faster speed so can maybe generate more energy maybe like with each electron’s electromagnetism to induce more current. Perhaps to cause more heat maybe like with collision with inner wall of the electron bottle or electron’s electromagnetism to cause heat with the electron bottle:

Electron bottle: Other ideas with generating energy

Gravity / gravity wave to maybe be able to affect each susceptible electron to maybe move at a faster speed.

Movement of the electron bottle. Maybe if the electron bottle were to move to hit an electron with added movement speed. Or maybe with a material for reflecting magnetism like a diamagnetic material to maybe reflect each susceptible electron’s magnetism to reflect the electron away with more movement speed that way. Maybe like this could be caused from sound vibrations for example.

  • Maybe similarly this could perhaps happen with heat since perhaps heat is vibration of each atom.

Light. If light can hit an electron then could maybe cause to move faster. Maybe with heat could make infrared light inside of the electron bottle to affect each susceptible electron that way. If can have a transparent electron bottle then could maybe more easily allow light from the outside into the container maybe like visible light. However with a transparent container maybe due to each electron emitting electromagnetism to be able to emit various spectrum of light that could be dangerous maybe like UV light to easily go through the transparent container. So perhaps an opaque container are ideal to perhaps block harmful light.

Electron bottle: Gravity waves

Maybe since an electron attracts gravity and if to move to make a gravity wave.

So maybe each gravity wave can have a push and pulling effect towards the direction the gravity wave are moving.

If to store electrons in an electron bottle then maybe since each electron constantly move maybe like with zero point energy then could constantly emit gravity waves maybe in many directions of the electron bottle. This way can repel matter from many directions of the electron bottle.

Maybe if for example have an electron bottle with a dense block of matter maybe like made of iron attached to the outside of the electron bottle then maybe each gravity wave that move towards the direction of the dense block of iron to push and pull on the dense block of iron to maybe cause to move towards the direction of the dense block of iron maybe like a thruster.

So for example maybe this could be useful for spaceship propulsion.

Electron bottle: Notes

Maybe heat from each electron maybe like with colliding with the inner wall of the container to maybe cause heat. With heat can maybe heat up the conductive surface / electrode of the container to maybe be able to emit each electron easier like as an electron emitter maybe like with both wanting to add or remove each electron.

Since each electron perhaps repel each other do to the same electric charge then maybe each electron reduce how effective can add each electron into the electron bottle. Which also maybe due to each electron repelling each other then maybe can force each electron closer to the inner wall of the container to for example cause more heat maybe by colliding with the inner wall and or from electromagnetism.

Electron bottle: Possible dangers

If to open the electron bottle with electrons inside then could perhaps be dangerous like maybe could cause burns like with human skin and blindness like with each human eye.

  • Maybe similarly if to discharge each electron from the container quickly then maybe since each electron are moving through the conductive electrode to maybe cause heat which maybe could be harmful like with being able to burn like with human skin and even break the electron bottle maybe like with melting it which then perhaps suddenly release each electron stored in the container.

Storing light in a container

Maybe the higher spectrum of light the more difficult it is to store in a container. Maybe like with visible, microwave spectrum are difficult to store in a container. However maybe could more easily store lower spectrum of like the radio wave spectrum of light inside of a conductive container.

Maybe could for example for emitting the radio wave spectrum of light could have an antenna inside of a conductive container to emit each radio wave. Which the antenna should definitely be insulated from the conductive inner wall.

Could maybe call a container for storing light a light bottle.

Also just to mention maybe due to a superconductor not having a lot of resistance can be useful with storing light so as to maybe reduce energy loss from resistance.

Light bottle: Gravity waves

Maybe if a photon (I guess an individual light particle / wave) were to collide with another photon then maybe each photon to annihilate while making an electron and positron. Which just to mention a positron are perhaps the opposite charge to an electron.

Perhaps due to each electron and positron attracting gravity to then attract gravity and maybe if the electron and positron collide to make 2 photons and losing gravity maybe making a gravity wave.

So maybe this can be another way to make gravity waves using light.

Maybe information about photon reflecting off of another photon:

https://en.wikipedia.org/wiki/Two-photon_physics

Maybe also something related are Delbrück scattering:

https://en.wikipedia.org/wiki/Delbrück_scattering

Light bottle: Energy generation

Maybe similarly to with the electron bottle with generating energy using each electron maybe like with constantly moving like with zero point energy could maybe be similar with an electron and positron from a photon colliding with another photon. Which just to mention perhaps a positron also emit electromagnetism so perhaps could work similarly to an electron with generating energy. Which also perhaps due to an electron and positron being opposite charge to attract to each other and perhaps collide to annihilate to perhaps then emit 2 photons, maybe each as a radio wave as radio waves that collided from before. Which then perhaps lose emitting electromagnetism as before when there were an electron and positron.

Maybe another idea with generating energy from storing light in a light bottle could be from each photon directly maybe like also due to each photon constantly moving maybe like with zero point energy. Maybe could cause energy like heat, maybe current like with the radio wave spectrum of light without losing energy. Though I think maybe due to colliding with the interior of the light bottle to lose energy / amplitude maybe like as heat so maybe not easily able to use for energy that way.

Light bottle: Possible danger

If the container are suddenly opened releasing light then could perhaps be dangerous perhaps like with causing burns like with human skin and blindness like with each human eye.

  • Which also should perhaps be careful to limit how much light discharge from the container as perhaps when discharging could cause heat with the light bottle which if too much heat could maybe cause damage and break the light bottle opening it maybe like from melting.

Light bottle or electron bottle: Note

With either an electron or light bottle should make sure the inner container are of a vacuum so can maybe reduce resistance and with causing heat and also so can perhaps have more storage space.

More information

More information about storing electrons and light and other information like with most likely aliens abducting and exploiting people as a resource in a text document called “Information about totalitarian and manipulative aliens.odt”, also with picture in the post perhaps also prove these aliens are real:

https://lemmy.world/post/18504237

  • Also there are links to a zip file and google drive folder that include other text documents files like video files referenced in the “Information about totalitarian and manipulative aliens.odt” document.

  • When mentioned storing electrons or light are near the bottom of the document “Information about totalitarian and manipulative aliens.odt”. Each title for storing electrons or light are in bold text with cyan highlight. Title in the document for storing electrons: “Storing electrons in a container” . Title for storing light in the document: “Storing light in a container”.

  • LogicAndEthics@lemmy.worldOP
    link
    fedilink
    arrow-up
    1
    arrow-down
    2
    ·
    edit-2
    15 days ago

    If each conductive atom of the inner conductive surface cannot collect any more electron then perhaps any other electron inside of the container to remain flying around inside. Which can perhaps add enough electrons inside to not be collected with the inner conductive surface.

    • catloaf@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      15 days ago

      So you’re creating free electrons to the point that the container not only has a net negative charge, but is effectively saturated? Sounds like you’re going to be at a net negative power efficiency long before you consider this battery charged.

      • LogicAndEthics@lemmy.worldOP
        link
        fedilink
        arrow-up
        1
        arrow-down
        2
        ·
        edit-2
        15 days ago

        The idea is not all about containing each electron on the surface of the conductive wall its about each free electron flying around inside of the container. Like a bottle that initially had a vacuum that are filled with air (atoms). Instead of filling with air can maybe just fill with each free electron to fly around inside.

        • catloaf@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          15 days ago

          Yeah, I understand that, but electrons don’t really want to bounce around freely. They want to find a proton to hang out with. If you want to keep a charge, you either need stable ions like in LiPo batteries, or maintain an external power source.