Extreme overclocking involves cooling a CPU to subzero temperatures using an air conditioner, dry ice or liquid nitrogen. This causes the surrounding air to cool down, forming droplets on the CPU, motherboard and heat sink. Overclockers prevent droplets from accumulating on the motherboard using petroleum jelly or some sort of absorbent insulating material.

Since this condensation comes from the air, I figure it should be free of impurities, just like distilled water. This should mean that the droplets shouldn’t be able to cause a short circuit. Due to the low temperature, corrosion shouldn’t be a problem either.

Am I missing something here?

  • toasteecup@lemmy.world
    link
    fedilink
    English
    arrow-up
    19
    ·
    1 year ago

    Pure H2O is nonconductive, it’s the impurities in water like salt and the like that make water conductive.

    As another post stated, take water, add dust and you have a conductive fluid

  • EatYouWell@lemmy.world
    link
    fedilink
    arrow-up
    18
    ·
    1 year ago

    Condensation isn’t distilled water. The air is a mixture of gases, and those gasses mix with the water.

  • FuckyWucky [none/use name]@hexbear.net
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    1 year ago

    It would pick up dust and other minerals from the environment and become conductive no? matters quite a bit since all the pins are so close to each other.

  • nothacking
    link
    fedilink
    arrow-up
    5
    ·
    edit-2
    1 year ago

    Any contamination (even CO2 from the air) will make it conductive enough to cause corrosion, eventually ruining the circuit board. Once this corrosion starts, it can add metal ions into the water, further increasing conductivity, leading to more corrosion. If you’ve ever tried to build an electrolysis cell you will know how good water and electricity are at dissolving metal. (Even thick wires can disappear in minutes)