𝑔𝑎𝑙𝑎𝑥𝑖

  • 2 Posts
  • 111 Comments
Joined 1 year ago
cake
Cake day: July 4th, 2023

help-circle

  • It’s much easier said than done, but perhaps you should be putting more energy into your relationship with yourself too, not just with her. Sometimes these issues arise as a side effect of the people in the relationship not taking good care of themselves and their life. Imagine getting yourself to a place where you feel confident again and secure despite whatever might happen between you two. Working on that magnetism created by self-fulfillment and self-focus might invite your gf to feel freer and more inspired to start pursuing and desiring you again. I don’t mean play games, but just create a bit of space to recreate some of the desire.

    Keep in mind it might not be in your control if it doesn’t have anything to do with you. Your gf might be struggling with hormones, body image issues, stress, depression. Sometimes you get used to being in a relationship and take it for granted a little too (especially if she feels like the option is always there). If you pull back from always being open to sex, create a bit of scarcity, and show focus on your own happiness and your own life outside her, it might help her to feel less stressed and find her way back to you. It’s understandable to feel unstable about things and it sucks that it sounds like she isn’t working on things together with you, but maybe she’s just not there yet. Give it a little time and trust that you’re doing as much as you realistically can for the relationship.


  • The 2 is a purge line, meant to clear any pressure in the nozzle and wipe it off before a print. It can be edited in your Start G-code on the printer settings tab > custom g-code on prusaslicer.

    The 1 is a skirt, meant to get rid of any last few hanging bits of filament and start a clean print (sometimes the purge line doesn’t get everything off the nozzle). It can also be used to gauge any last minute adjustments to your z offset. If the nozzle is too close or too far, you’ll know before the print actually starts. I find that the skirt can be disabled if you’re using a brim, since it’s redundant at that point. Some who have fine tuned printers may opt not to use one at all without much issue. It isn’t meant as any kind of draft shield as another person said - that’s a separate setting. It’s just a failsafe for the cleanest prints possible, avoiding hanging bits of filament, blobs from built up pressure, and incorrect z height. The first layer is the most important so everything that helps the first layer helps the rest.






  • Doubtful. The main reason I could see a 3D printer starting a fire is either thermal runaway, often caused by bad software (on cheap printers) or electrical issues. You can check your wiring and make sure that nothing looks loose and all of your cables are in good condition. You can also make sure that your printer firmware is up to date. It’s a Prusa right? I think you should be safe from software failure in that case, as they’re quality.

    If you’re really concerned about it, you can also move your power supply, and even your mainboard, outside of the enclosure by using longer cables. This would keep the majority of the electrical components away from the foam and heated box. From my position I don’t see an issue, but that’s my personal opinion – not legally accountable information. I will say that Stefan on CNC Kitchen uses foam as well, to get rid of ringing in prints. If you decide to go through with it, just use common sense and check to see if anything is hot. You might also get some benefit out of looking into silent stepper motors/drivers and trying to make the printer itself quieter.


  • I haven’t used it outside of Windows Firefox and Android but it works great for me as well.

    For mobile specifically: Rarely do I have any issues, and when I do, I have a quick panel button for Bitwarden (top drag down menu) that lets me manually trigger it. I can’t think of any apps that it doesn’t work with. My one nit is that autofill credit card info doesn’t work often, but obv that’s a secondary use, and the info is still with me if I ever need it on the go. And adding new login info can be a little tedious on mobile – much easier to create it first, then autofill. Highly appreciate the 2FA feature too. The auto copy feature feels really seamless regardless of if I’m on my phone or not.

    I’d be curious what issues you seem to be running into with it.


  • I was in my early 20s when I started. Wanted the calming effects of nicotine, was into other similar interests, and was dating someone who also got into it. He was actually the second vaper I’d dated, so you could say it took me a while to be interested.

    I’d had a couple cigs before but I never considered myself a smoker and didn’t take to it. Vaping became a huuuge hobby for me. Learning about different mods, building your own coils, DIY e-juice, etc. I was vaping all day, all the time, pretty much as soon as I woke up (at the lowest amount possible though). It was a nice flavor and chemical pick me up when I was on edge. Sort of like a physical distraction. I vaped for 5 or so years. The lasting effects I’ve noticed are that sometimes I miss it. That’s it. It was pretty hard to quit, mostly because I didn’t want to. I had a lot of resistance, because it became a passion for me. But nicotine regulations started to suck, and that same partner quit as well. I got really sick with a flu and didn’t vape during it. Then, I didn’t start again after I got better. I had dreams about it, and it took a bit for me to want to move on.

    The thing is, though, I don’t feel any different now than when I was vaping constantly. It doesn’t improve your life that much. It’d be great if it could be an occasional thing, like alcohol or dessert is, but it’s hard to not do it all the time if you’re doing it at all. And you get to an equilibrium where it just doesn’t feel that strong. Hence the constant clouds.

    The most annoying part about it is that it becomes like a security blanket. You have to take it everywhere. Forget it for work? Guess you’ll just be late today. Have to sit for a movie? Man it sucks not to vape inside. Flying for hours? What a nightmare, can’t wait to land and go outside.

    It was annoying to not feel myself if I ever decided to leave my vape behind. And blowing clouds out of my car was great, but it sucked having to wipe down my car windshield all the time due to the glycerin condensation. Same with inside – no smoke on the walls, but the glycerine would hang around and I’d have to run an air purifier. I’d often worry about the vapor leaving slight residue all over my apartment, belongings, monitors, PC internals and such.

    Overall, it was great for a while as it was something I got really into, but it was also a lot of money and stress over something that didn’t really benefit my life the way other hobbies still continue to do. Much better to be a free person unattached from adult security blankets. 😎


  • I think you’re right to complain, but at the same time, aren’t single use plastics much lower on the pollution scale than, say, the fishing industry or other industrial plastic pollution? It makes sense to reduce and reuse, I try - but also find it beyond helpful to have a bunch of (unorganized) baggies strewn about for things like loose screws, storing filament spools, organizing USB cables, etc. I could definitely use something like this instead of a black hole under my sink. I know it’s easy to judge – esp without the whole picture – and hopefully people aren’t polluting willy nilly, but curiosity is a better approach than judgment or shaming when it comes to changing minds, wouldn’t you agree?



  • I was just thinking about this the other day. It’s weird how Google has become so unusable due to its own practices that it seems to be giving up on being a search engine. I’ve been getting spam pop-ups lately on mobile search asking me to use AI. Of course people will wanna use it, they can’t find their answers normally anymore. You search for something and it’ll show you something completely unrelated because it’s trying to be “helpful” and corral you towards buying shit, and it doesn’t even do a good job at that. Heaven forbid you start to look past the first 3 pages… I don’t have a clue how these websites in the search results are maintained when they’re filled solely with spam and nonsensical gibberish. I’m totally with you. We used to actually see communities around and now it seems like they’ve fallen into the dark web, unfindable except by means of knowing someone who knows someone or, frustratingly, reddit. Paradoxically, it’s like the random AI-generated hash from the dark web is now here clogging up the tubes. I feel like everyone else came along and started dumping trash everywhere because we didn’t put up any signs or make any rules not to litter.



  • Depends. Is the loneliness a byproduct of choices made for happiness in other aspects of your life, like moving to a new city or being picky about your social circle? Are you choosing to stay in and not interact for certain reasons? Or is the loneliness caused by things you can’t control, like people leaving or mental health issues?

    If it’s the former, I say embrace it and work on focusing less on how you think your life should look. Pay attention to the things that you love by yourself. Take in the moments any moment where you notice you’re having a great time and don’t have to stop due to someone else. Imagine you just got done with a 12 hour road trip with someone who talks too much and breathe in the silence and peace of the moment. Listen to rain or cars rushing by. Sometimes, I find that loneliness can be caused by feeling like you’re missing out on something but maybe wouldn’t even make you happy. There are lots of people who feel lonely in their families or friendships or relationships.

    If it’s the latter, I’d work up to a more comfortable and satisfying level of socialization. It takes time. In that process, you’ll hopefully find yourself leaning pickier and finding out what works and what doesn’t. Be selfish. Learn to spend time with people and then decide for yourself whether you want to keep spending time with them. Treat your energy and presence like precious rubies. They are! Invest in who matters most to you and keeps you feeling good after you leave. This will build your confidence and belief in your worth and motivate you to keep working on the things that keep you from happiness. Ending loneliness isn’t a goal you get to, it’s a side effect of choosing people who see the real you and doing the self care of letting others in. :)


  • This is just one perspective, but people-pleasing is when you go overboard with being considerate of others – to the point that you lose yourself. So like the one friend who will say they like all the same things as you, say yes to everything, never disagree, etc. just because they desperately need you to like them. They don’t have boundaries, so even when someone hurts them, they’re like “it’s okay, I don’t mind!” They’re missing a bit of self-respect.

    There’s nothing wrong with being kind or considerate of others! It’s really important to have to form deeper relationships. The problem is when seeming ‘nice’ takes the place of your personality or being honest about your real self, because you value other’s validation more. People can sense that and it can put them off because they want to get to know the real person. People-pleasers can play the character that they think others want them to be, instead of putting in the work to like and value themselves and communicate their own needs and boundaries.




  • I haven’t been yet personally, but I have a lot of friends who go every year. Some of the things that they love about going are the big cultures around consent, the random awesome and unique things that you find everywhere, spending time with friends, a lack of money economy, being your completely human self w/o any judgement, and basically stepping into a world that’s separate from the rest of society. You’ll find a lot of these things at local burns as well. If you are getting curious, I would really encourage the latter. Regional or local burns are like mini burning men with a similar vibe, but a lot more conscientious and tight-knit. The best way to get into one is to find a facebook group for the one closest to you. Sometimes they’ll meet up outside the events, and you can go to ask questions and to coordinate. Since there’s a lack of money economy, everything is done either with trades or with shared responsibility. There’s something at burning man called “radical responsibility” where each person is responsible for their own wellness and contributions. So you can’t go expecting there to be vendors or other people with food or water or what have you – it’s important to figure those things out ahead of time so that way you’re not a burden on others (which allows you to be a contributing member of the community and show up fully). Like I said I haven’t actually been, so I don’t know the full details, but that’s most of what I do know! Most people I’ve met that go are some of the most interesting people I know and really know how to party and what life’s about for themselves, so I recommend finding out more :)


  • One thing that I’ll add in is that I started with a similar setup, but I’ve heard it isn’t ideal to be turning your pi on and off all the time without a proper shutdown sequence. I have my printer psu and filament dryer both plugged into smart plugs. Klipper is connected to home assistant wirelessly so I can turn them both off when prints finish, at idle, etc. My printer is in an enclosure, and the psu, pi, and mainboard both sit outside to keep them from getting hot. Pi has its own charger. I don’t find it to be a burden to have the pi and psu both plugged into outlets rather than only having one plug. I find it to be a lot more stable for troubleshooting and any power issues that have come up.

    Just so you know, I also started off with the teaching tech all in one electronics box. I spent a ton of hours modifying it for my particular sbc and printer. I guess I ran into issues when I would have to take out one of the boards to work on it, lol. The tolerances were really tight and it was just a pain to get it out from behind. I still have the pi+mainboard both in a box, but it’s a new one I designed later on that just sits on a shelf below the printer (wires come through a hole). I find it to be really useful for printing ABS and other hot filaments and keeping a clean and tidy enclosure.