It’s funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
They’re actually behind. 3D printers are a much newer industry. Most industries start out super open, competitive and collaborative. This speeds up development to consumer-grade products. Eventually one or two companies gain sufficient marketshare to start enforcing anti-consumer shitfuckery. Look at the recent drama with Bambu printers and you’ll find that’s exactly what’s happening. It’s a tale as old as time.
Framework actually trolled us into thinking they were going to release a printer but instead they went into a market segment where everything was already modular, repairable and upgradable and gave us something that was not, at all. But hey, they gotta capitalize on the AI nonsense too, I guess?
Idk if the tech for 3d printers is really more complex. All of the parts are readily available, basically nothing needs to be specially made except the hot end (one single metal part)
The consumer experience for 2d printers worse IMO but that’s probably because I’m stuck on Windows with its terrible printing system
2D printers used to be like this.
They all worked with open, universal drivers, no additional software, and any ink cartridge that fit inside the bay.
But then companies figured out that people will just buy the cheapest printer on offer, regardless of everything else.
I think that if one wants to change this, it probably involves some kind of regulation that affects how people shop, or at least a shift in social norms, so that some kind of metric of over-time cost is prominently featured next to the up-front price on goods.
We’ve seen shifts like that before.
There was a point in time where it was normal, in the United States, to haggle over the prices of goods. It really wasn’t all that long ago. Today, that virtually doesn’t exist at all, except for over a very few big-ticket items, like cars and houses.
The change started when some people…I think Quakers…decided to start selling their goods with a no-haggle policy. NPR Planet Money did an episode on it some time back…lemme see if I can go dig it up.
JIANG: The whole world I’ve known is in this price-tag world. Everything has a price, one price.
GOLDSTEIN: But when you take the long view of the historical world, this price-tag world is like a bizarre aberration. You know, for almost all of the history of human commerce - for thousands of years - you walk into a store, and you point to something. And you say, how much does that cost? The guy at the store is going to say, how much you got? You know, everything was a negotiation. And there were good reasons the world was this way.
JIANG: Say I have a store and - I don’t know - I’m selling eggs. And a guy walks in, and he looks like he has all day to haggle. And he’s really been scouting out the best place to buy eggs. So I sell him a dozen eggs for a buck 50.
GOLDSTEIN: So then, a few minutes later, somebody else comes in. This guy’s wearing fancy shoes, clearly does not have a lot of time to haggle. So you sell him eggs for twice as much. You sell him eggs for 3 bucks.
JIANG: Each customer pays what they think is a fair price. I make a profit. We all win.
GOLDSTEIN: This was just the way things were, and almost everybody accepted it, everybody except this one religious group, the Quakers. Robert Phillips, the consultant we talked about the Coke thing, he said the Quakers did this really fringy, radical thing.
PHILLIPS: They would have a fixed price. The Quaker would - the merchant would say what the price is, and that price would be the same for everybody.
GOLDSTEIN: That’s it. Having one price for each item, that was the Quakers’ radical thing. They thought haggling was just fundamentally unfair. They thought charging different people different prices for the same thing was morally wrong.
JIANG: You can imagine walking into a store and pointing to a dozen eggs and getting all fired up to do an egg haggle.
GOLDSTEIN: Let’s go. Let’s do this.
JIANG: And then your friend, like, kind of elbows you and says, no, no, this is a Quaker store.
GOLDSTEIN: No haggling. No haggling here.
JIANG: What are you doing?
GOLDSTEIN: Yeah, the Quakers were definitely, definitely in a real minority with this no-haggle thing.
JIANG: But as the modern economy got going in the 1800s and businesses starting getting bigger and bigger, haggle worlds got to be a hassle.
GOLDSTEIN: You know, if you are running a store, if you’re working at a store, you need to know a lot to haggle. You need to know how much you paid for the stuff, how much your competitors are selling it for. You need to know how much different customers are willing to pay. Robert Phillips says you couldn’t just hire some kid on summer vacation to come and sell stuff at your store.
PHILLIPS: Clerks usually had long apprenticeships before they could actually be allowed behind the counter. So they had to spend a couple of years learning the business.
GOLDSTEIN: Years?
PHILLIPS: Yeah, typically. Learning how to haggle before you would let them be left alone.
JIANG: Haggling is a pain for customers, too. Imagine you’re at some store and there are five people in front of you in line. And you have to wait for them to all go through that haggling process before you can buy your shirts or whatever.
GOLDSTEIN: So finally around 1870, a few people decided to take a big risk. They decided to break with haggle world. They invented the price tag, this actual piece of paper stuck on each thing that tells you the price - not some starting offer subject to negotiation, but the price. And inventing the price tag was not just about fairness or what was morally right; it was about building really big stores.
PHILLIPS: Two stores here in New York, Macy’s. And Macy was a Quaker. And he featured fixed prices. The most famous one was Wanamaker’s in Philadelphia.
JIANG: Wanamaker and Macy’s, they’re building these new things, these department stores. And they’re trying to hire all of these clerks, but they don’t want to train them for years and have them become master hagglers. So the price tag solves this problem. It makes it easy for them to hire the clerks.
PHILLIPS: All they had to do was be essentially what clerks are today, you know, knowledgeable about the fabric. Oh, madam, this would look wonderful on you. They didn’t have to do pricing. They didn’t have to haggle. They didn’t have to know the cost of items.
JIANG: Wanamaker becomes this kind of evangelist for the price tag. He says, look, the price tag, it means you, the customer, you don’t have to arm wrestle with the clerk anymore when you buy things.
PHILLIPS: There’s no longer a war between the seller and the buyer, which is what he called the higgling and the haggling. Everyone can come into Wanamaker’s and know they will be treated the same.
JIANG: Customers loved it. The price tag spread. It was everywhere.
That wasn’t driven by regulation, but by consumer preference. Consumers (usually, outside maybe upscale restaurants) demand to see the up-front cost of something they buy before buying it. So it’s possible that if costs keep shifting from the up-front cost that we can readily see at the time of purchase into over-time costs that we cannot as readily see, we might see consumers just refuse to buy items from retailers that don’t also show some kind of a reasonable over-time cost also visible.
Or maybe the government could require some level of disclosure of over-time costs to be shown when selling an item, they way they standardized display of credit card interest rates.
Bambu is working on it already — can’t print unless you’re connected to the internet and send your files through their server, can’t connect to the printer with other slicers besides their slicer.
They had to walk that back some; there is now a “developer mode” where old standard functionality is still exposed, but they’re clearly working as hard as they can to turn it shitty.
This is mainly because consumer 3d printer have been developped by 3d printing enthusiast first and not a company, Prusa which was leader for some time used a lot of open sources project to build their printers. As it’s getting mainstream as time goes by more and more companies shows up with closed sources project sadly.
Don’t worry. Companies like Bambu and others are trying to lock down shift their printer business in the style of 2d printer companies. I hope it at least happens very slowly, but the enshittification is happening…
Has anyone figured out how to 3d print a 2d printer yet?
Edit: actually, scratch that entirely. How difficult do you suppose it would be to create an aftermarket non-malicious logic board to drive the hardware in lieu of the malicious OEM board? After all, it’s not the cartridges refusing to print.
There are some projects out there that do the entire frame. Steppers, hotend, and control boards are out of reach. There’s some hypothetical ways you could do it, but it’d be far more expensive than buying off the shelf stuff and probably get worse results. Even the frames tend to take a lot of filament.
It’s more of a nice idea than something practical.
There is a piece of software which will take a word document and convert it into an embossed 3D print file. So you could always just skip the middleman and 3D print yourself a plaque version of your document instead.
It’s funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
It’s not that hard to convert a cheap 3D printer into a pen plotter is you want to do some 2D printing.
People that Weasle their way up the corporate ladder have been prefectly groomed to have no shame.
They’re actually behind. 3D printers are a much newer industry. Most industries start out super open, competitive and collaborative. This speeds up development to consumer-grade products. Eventually one or two companies gain sufficient marketshare to start enforcing anti-consumer shitfuckery. Look at the recent drama with Bambu printers and you’ll find that’s exactly what’s happening. It’s a tale as old as time.
Framework actually trolled us into thinking they were going to release a printer but instead they went into a market segment where everything was already modular, repairable and upgradable and gave us something that was not, at all. But hey, they gotta capitalize on the AI nonsense too, I guess?
Enshitification is the word of this century
Of this species.
The consumer getting a product is just a byproduct of generating profits.
Idk if the tech for 3d printers is really more complex. All of the parts are readily available, basically nothing needs to be specially made except the hot end (one single metal part)
The consumer experience for 2d printers worse IMO but that’s probably because I’m stuck on Windows with its terrible printing system
2D printers used to be like this.
They all worked with open, universal drivers, no additional software, and any ink cartridge that fit inside the bay.
But then companies figured out that people will just buy the cheapest printer on offer, regardless of everything else.
I think that if one wants to change this, it probably involves some kind of regulation that affects how people shop, or at least a shift in social norms, so that some kind of metric of over-time cost is prominently featured next to the up-front price on goods.
We’ve seen shifts like that before.
There was a point in time where it was normal, in the United States, to haggle over the prices of goods. It really wasn’t all that long ago. Today, that virtually doesn’t exist at all, except for over a very few big-ticket items, like cars and houses.
The change started when some people…I think Quakers…decided to start selling their goods with a no-haggle policy. NPR Planet Money did an episode on it some time back…lemme see if I can go dig it up.
Yeah, here we are:
https://www.npr.org/transcripts/415287577
Relevant snippet
That wasn’t driven by regulation, but by consumer preference. Consumers (usually, outside maybe upscale restaurants) demand to see the up-front cost of something they buy before buying it. So it’s possible that if costs keep shifting from the up-front cost that we can readily see at the time of purchase into over-time costs that we cannot as readily see, we might see consumers just refuse to buy items from retailers that don’t also show some kind of a reasonable over-time cost also visible.
Or maybe the government could require some level of disclosure of over-time costs to be shown when selling an item, they way they standardized display of credit card interest rates.
Over time as 3D printers go from tinkerer’s toy to household staple, I’d expect them to become more locked down and anti-consumer.
Bambu is working on it already — can’t print unless you’re connected to the internet and send your files through their server, can’t connect to the printer with other slicers besides their slicer.
They had to walk that back some; there is now a “developer mode” where old standard functionality is still exposed, but they’re clearly working as hard as they can to turn it shitty.
By my count, it’s been tried twice.
They would have to become sci-fi level capable before they would be considered household staple items.
This is mainly because consumer 3d printer have been developped by 3d printing enthusiast first and not a company, Prusa which was leader for some time used a lot of open sources project to build their printers. As it’s getting mainstream as time goes by more and more companies shows up with closed sources project sadly.
Isn’t prusa now doing anti consumer / closed source stuff?
Aren’t you confusing them with Bambu?
Their slicer is based on Prusa’s exactly because Prusa isn’t doing closed source.
Don’t worry. Companies like Bambu and others are trying to lock down shift their printer business in the style of 2d printer companies. I hope it at least happens very slowly, but the enshittification is happening…
Has anyone figured out how to 3d print a 2d printer yet?
Edit: actually, scratch that entirely. How difficult do you suppose it would be to create an aftermarket non-malicious logic board to drive the hardware in lieu of the malicious OEM board? After all, it’s not the cartridges refusing to print.
There are some projects out there that do the entire frame. Steppers, hotend, and control boards are out of reach. There’s some hypothetical ways you could do it, but it’d be far more expensive than buying off the shelf stuff and probably get worse results. Even the frames tend to take a lot of filament.
It’s more of a nice idea than something practical.
There is a piece of software which will take a word document and convert it into an embossed 3D print file. So you could always just skip the middleman and 3D print yourself a plaque version of your document instead.
Just print it, roll some ink on it and slap a sheet of paper on top. There you go, printing 2.0 or something.
That sounds like a 15th century printing press with extra steps.
Kind of, but with less wood and a lot more micro plastics. That’s how you can tell it’s modern.
I used to have wood a lot more often, before microplastics.
If you start sieving your urine you’ll never have to buy filament ever again. Really it’s a blessing in disguise.
Except those who aren’t.
deleted by creator