• viking@infosec.pub
    link
    fedilink
    English
    arrow-up
    16
    ·
    1 year ago

    My friend’s dad has a CNC machine that requires floppy disks to load the design patterns. He’s worried that a mechanical failure of the disk drive will eventually be the end of it, rather than the machine itself being obsolete. It’s been going strong for almost 40 years now.

    • purplemonkeymad@programming.dev
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      1
      ·
      1 year ago

      Look for usb floppy emulators, you can have the floppy images in a usb flash drive. No moving parts or need to find expensive floppies.

        • renormalizer@feddit.de
          link
          fedilink
          English
          arrow-up
          8
          ·
          edit-2
          1 year ago

          It’s reverse: you get a board that has a floppy interface on one side and a USB socket on the other. You plug in a USB drive and the board uses a file on the drive as the floppy disk, pretending to be a floppy Drive connected to the interface. It’s a little less convenient because you have to deal with disk images but it works without moving parts.

    • pyt0xic@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      It might be possible to buy an old floppy drive off ebay and switch out the broken one of that happens, as long as there are no proprietary connectors and such…

        • bufordt@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Ah yes, Compaq, the company that used non standard power supplies but with the standard wire coloring and connectors. I had several customers blow up their motherboards after buying standard replacement power supplies.