The peel is thicker and attached firmly to the root, so cutting off the root end first will save a lot of time and effort peeling garlic.

you can avoid stripping the peel into tiny sticky pieces or digging grooves into the clove while you gouge or scrape off the peel from the top or side.

this is another lifehack I would have appreciated learning years earlier.

    • Varyk@sh.itjust.worksOPM
      link
      fedilink
      English
      arrow-up
      5
      ·
      edit-2
      3 个月前

      that was my go to for a while, but it’s easy to wind up with sticky little strips of peel and I like making fried garlic slices, like little fried garlic chips, and you can’t use a smashed clove for those.

      smashing garlic cloves will help, but since i still have to pick out pieces of peel and take off the bottom part anyway after a smash, I usually do the root end cut now.

      especially if I’m using an entire bulb, it’s easier and quicker for me to cut off the entire root end all at once than a bunch of smashes.

      • TheAlbatross@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        1
        ·
        3 个月前

        Yo that’s fair! I’m often using garlic in stir fries or dips, so I don’t want those thin slices so smashing is fine. I’m deffo gonna try this tip for prepping some cloves for pickled garlic tho.

        Other garlic related hack, you can cut the top off just above the tips of all the cloves, rub em down with a lil olive oil, wrap em in tin foil and roast em at 400°F for 35 min, skin and all. The resulting cloves can be squeezed outta the bulb like butter and make a phenomenal spread on their own or a great addition to hummus, or mix it with butter and let set for a decadent compound butter.

        • Varyk@sh.itjust.worksOPM
          link
          fedilink
          English
          arrow-up
          3
          ·
          3 个月前

          nice garlic game!

          I’m right there with you on soft garlic.

          I cut off the root end of a couple bulbs, peel and pan-steam the cloves, then mash them up in a bowl with a fork and use them like an accompanying spread or dip for steaks or scallops.

          I used to sautee them but that takes forever and it’s easy to char the edges.

          The garlic flavor is strong enough that intense steaming doesn’t warp the flavor and they get soft enough to whip into a puree after 10 or 15 minutes deoending on the heat.

    • bluGill@fedia.io
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      3 个月前

      Sure, lots of other ways. Use some imagination next time you are in the kitchen. So far I haven’t found a better way, but I’ve tried lots of things and I’m open to someone finding something I haven’t yet that is better.

  • MustardCabbage@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    3 个月前

    Another good method is to get two large metal bowls face to face with the cloves inside, and shake the shit out of them like a human fire alarm.

    Be warned though, this WILL terrify your cats, if you have any

    • Varyk@sh.itjust.worksOPM
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      3 个月前

      I haven’t heard of this one, you shake the garlic cloves and they bump into each other and peel themselves? or does this have something to do with the specification of metal bowls?

      that seems like a lot of work.

      is that a lot of work?

      • MustardCabbage@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        ·
        3 个月前

        I would imagine it’s more the collisions with a hard surface, and metal bowls are simply the lightest way to do that. It’s actually not a lot of work; it maybe takes 20 seconds of shaking. I like the other suggestion of using a cocktail shaker, though. That would be quieter AND easier, assuming it’s equally effective

        • Varyk@sh.itjust.worksOPM
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          3 个月前

          I couldn’t stop thinking about the shake-peel so I just gave it a whirl.

          two full bulbs pf garlic later, my first impressions of the shake-peel go like this:

          I’m shocked this works at all.

          lots of cloves are unpeeled after multiple shaking sessions.

          deeper bowls could make a difference.

          I have to clean the bowls afterward because garlic juice is coating the entire inside of the bowl.

          The garlic cloves are very bruised and damaged after the shaking.

          prep work of cutting off the root end and the top of the cloves makes them much more likely to be peeled by the end of the shaking.

          maybe if I get better at this or I have better tools, this will save time and effort; right now it’s more difficult and disrupts my chill kitchen flow with some pretty frantic shaking, but I could see it getting easier and less disruptive as I get used to it.

          definitely an interesting suggestion and something I’ll try to improve on, thanks for bringing it up.

            • Varyk@sh.itjust.worksOPM
              link
              fedilink
              English
              arrow-up
              1
              ·
              edit-2
              3 个月前

              my success rate was really low without cutting off the ends, like 1-3 in 10 cloves peeled after multiple shakes, and i still had juice all over the bowls.

              i think the impacts bruised the garlic and allicin leaked out.

              without cutting the ends, do you pull apart the cloves in the beginning? or do you just toss the bulb in there and shake like crazy?

              do you use deep bowls?

              That’s the thing I’d have to try next, find some deeper bowls

              • MustardCabbage@sh.itjust.works
                link
                fedilink
                English
                arrow-up
                2
                ·
                edit-2
                3 个月前

                I pull the cloves apart first, discard the loose bits of skin, and then give them a shake to loosen the stuck-on skins. I’ve never had an issue with bruising the garlic, although the method, in my experience, also isn’t 100%

                • Varyk@sh.itjust.worksOPM
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  3 个月前

                  got it, thanks.

                  have you tried it with fresh and older garlic?

                  I feel like the higher water content in the fresh garlic might make it easier to shake peel.

                  since I just bought a bag of garlic, I’ll have to try this out next time and buy some fresher stuff.

        • Varyk@sh.itjust.worksOPM
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          3 个月前

          I have a couple bowls, I’ll have to give that a whirl tomorrow.

          I was going to make a garlic dip, and that’s an intriguing method of peeling garlic.

    • debris_slide@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      3 个月前

      If I have a lot of garlic I’ll do that or one of those silicone tube garlic peelers, but if it’s just a few cloves it’s usually not worth the effort for me.

  • Sabre363@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    3 个月前

    Same trick goes for onions. Bonus points of you leave a little still attached for use as a pull tab.

    • sugar_in_your_tea@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 个月前

      And very lightly mash so the skin peels away easier. If you’re picking at the skin, you’re doing it wrong and are likely to get a hard bit of skin up your fingernail, which hurts.

  • debris_slide@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    3 个月前

    Bonus points if you leave a tiny bit of the root attached to the skin so that when you pull the root off it starts the peeling process

    • Varyk@sh.itjust.worksOPM
      link
      fedilink
      English
      arrow-up
      1
      ·
      3 个月前

      ha, yes! If I notice one side of the peel is thick enough I will do this.

      that perfect feeling when you can pull off the whole peel in one piece is amazing.

    • Varyk@sh.itjust.worksOPM
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 个月前

      does this make peeling garlic easier for you?

      I could never peel more than one piece of garlic at a time with these, and still had to do all the prep work beforehand of cutting off both ends and then cleaning the tube every time, and I had to push really hard on the tube.

      the tubes were a lot more work for me than crushing or cutting off the root and peeling.