Tell us why we should unexpectedly come to love your hobby.

  • LrdThndr@lemmy.world
    link
    fedilink
    arrow-up
    187
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Ham radio.

    On the surface, it just sounds like listening to a bunch of old farts babbling on about their enlarged prostates, and tbf, there is a bit of that if you never go any deeper than 2M/70cm voice modes.

    But there’s just SOOOO much you can do.

    Want to see how far you can bounce a signal off a mirror laying on the surface of the moon? Yup. You can do that.

    Want to launch and communicate with your own satellite? Yup. It’s a thing.

    Want to remotely control devices from hundreds of miles away without using the internet? Yup.

    Want to gps track your car at all times, even when there’s no cell phone service? That’s called APRS.

    Want to have a conversation with astronauts on the ISS as it flies overhead? They’ve got ham equipment on board.

    You can even play with broadcasting and/or receiving “secret” tv and radio stations - that is, they’re on alternate frequencies that regular TVs and radios don’t pick up.

    It just goes so deep.

    • Flying Squid@lemmy.world
      link
      fedilink
      arrow-up
      26
      ·
      1 year ago

      I just can’t afford the equipment. I thought about it back in the analog days, but back then you had to learn Morse code and I just didn’t think I was up for it.

      • Twitchy1@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        16
        ·
        1 year ago

        Money is the biggest issue. I’ve had my general for years… have never been able to afford a radio to use those bands at home. Ive had a magnetic loop antenna all ready to use in my garage for several years but no radio to run it. The local 2m/70cm is just old guys complaining usually. Passing traffic is fun during hurricanes… Only so many times I can enjoy trying to hit satellites that are swamped with people.

      • agent_flounder@lemmy.one
        link
        fedilink
        English
        arrow-up
        10
        ·
        edit-2
        1 year ago

        Morse is no longer required-- yay!

        And with the appearance of low cost Chinese brand radios, the equipment can be cheap for 2m, particularly.

        The usual go-to for new hams is the Baofeng UV-5R and similar. The cost is about $20-30. It’s not the greatest radio and is kind of messy but for $20ish who cares if it gets you on the air.

        Also Hamfests are a great place to pick up cheap used gear. For example I got an entry level 2m mobile rig (an old Radio Shack model) for $10 and antenna for similar.

        If you want a new higher quality handheld transceiver (HT) there are options at $100 or less from Alinco and Yaesu. (Maybe Kenwood and Icom have budget options too idk)

      • AwkwardLookMonkeyPuppet@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        You can get a Baofeng UV5R for about $20 and it can broadcast on ham frequencies! Just don’t tell anyone I recommended that radio to you (I have 2 of them though). Morse code isn’t a requirement anymore either. Time to do it!

    • slazer2au@lemmy.world
      link
      fedilink
      arrow-up
      12
      arrow-down
      1
      ·
      edit-2
      1 year ago

      You can even play with broadcasting and/or receiving “secret” tv and radio stations - that is, they’re on alternate frequencies that regular TVs and radios don’t pick up.

      Go on…

      • agent_flounder@lemmy.one
        link
        fedilink
        English
        arrow-up
        9
        ·
        1 year ago

        Amateur Television aka Ham TV. It’s not really secret TV of course. But, yeah, you can broadcast and receive video and audio. I haven’t tried it yet but it always seemed like it would be kinda neat. https://www.hamtv.com/

    • AwkwardLookMonkeyPuppet@lemmy.world
      link
      fedilink
      arrow-up
      10
      ·
      1 year ago

      There’s also old farts talking about beer, motorcycles, and bears! That’s what the guys in my area like talking about. It’s pretty fun listening to them.

    • brokenlcd@feddit.it
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      I’ve tried to get into ham radio, but there is basically no one certified in my country, the closest place i can get certified is 270 km away… it’s not fun if you are basically speaking to yourself.

    • bayaz@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      I recently started studying for the Technician exam – excited to see I made a good choice!

  • Hazdaz@lemmy.world
    link
    fedilink
    arrow-up
    113
    arrow-down
    8
    ·
    1 year ago

    Literally ANY hobby can seem boring to most people, but it wouldn’t be a hobby if people that got into it didn’t find it interesting as all hell.

    • some_guy@lemmy.sdf.org
      link
      fedilink
      arrow-up
      8
      arrow-down
      1
      ·
      1 year ago

      I came here to suggest something, but you obviated the need. Well done. You out-thought the experiment.

      • Hazdaz@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        You can still suggest it. Might be a hobby no one thought it. But the reality is that to an outsider, most hobbies seem boring.

  • qooqie@lemmy.world
    link
    fedilink
    English
    arrow-up
    90
    arrow-down
    1
    ·
    1 year ago

    Birding, you’ll be truly surprised by the variety of just birds around you. Perks: it gets you out on trails, low cost of entry (binoculars), the data you produce of birds is used for research, and you’re just observing so you don’t need to worry about harming animals.

    • Acamon@lemmy.world
      link
      fedilink
      arrow-up
      50
      ·
      1 year ago

      I remember when everyone was excited about playing Pokemon Go and wishing that there was a way to do something similar but in the wilderness rather than cities. I wanted to be able to wander around the wilds trying to encounter strange and rare creatures. Then I realised I had just invented birdwatching.

    • JeromeVancouver@lemmy.ca
      link
      fedilink
      arrow-up
      10
      ·
      1 year ago

      Not sure if you are into board games but Wingspan is pretty fun. Really got me fascinated with different birds.

    • Guntrigger@feddit.ch
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Genuine question: when did birdwatching/ornithology become birding?

      Birding sounds like a not so distant cousin to dogging.

    • deezbutts@lemm.ee
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Can you explain a bit more about producing data that helps researchers? That’s intriguing to me.

      • qooqie@lemmy.world
        link
        fedilink
        English
        arrow-up
        12
        ·
        edit-2
        1 year ago

        Yeah man. So if you use the eBird app or website to track your birds you see (use Merlin bird id for id help) Cornell university actually maintains that and uses it. These sites and apps are highly highly recommended and almost mandatory if you find yourself doing birding often. Anyways, as you populate you list with sightings and areas you’ve found birds they can map out so much. Stuff like habitats, ranges, changes in these, population sizes, migration timings, and I’m sure there’s more I’m not thinking of. These are all important with human influenced climate change and habitat destruction.

  • Flying Squid@lemmy.world
    link
    fedilink
    arrow-up
    77
    arrow-down
    2
    ·
    1 year ago

    This was a relatively short-term thing, but I think it counts loosely as hobbyish… in my 20s, I was determined to find the best bloody mary in town. I went to every single bar, restaurant, etc. and tried each one in turn.

    Which sounds boring, I know, but I had so many great conversations and met so many interesting people.

    And to answer your likely question: Surprisingly, Red Lobster, which made its own mix from real tomato juice and didn’t use some crappy bloody mary mix. This was in the 90s, so I can’t endorse their current bloody mary.

    • Today@lemm.ee
      link
      fedilink
      arrow-up
      10
      ·
      1 year ago

      We used to do that - try to decide who had the best tortilla soup, tiramisu, burger, tacos, … Very fun!

  • Nyanix@lemmy.ca
    link
    fedilink
    English
    arrow-up
    62
    arrow-down
    3
    ·
    1 year ago

    Self Hosting. I love optimizing my securing my life while improving my family’s privacy. Nextcloud to store and backup media, contacts, and knowledge base. Hosting a free remote VPN on OCI, remote encrypted backups to a fellow enthusiast’s server…I love that while my data is local, if my house was to burn down, the years of pictures and precious memories will still be available. I also like being able to use this tech to help people close to me, doing backups for them, sharing ISO’s, etc.

    • douglasg14b@lemmy.world
      link
      fedilink
      arrow-up
      15
      ·
      edit-2
      1 year ago

      Yes! It’s a hobby that can go as deep as you want it to.

      Though it doesn’t produce physical outputs like many others :/

      Once you start getting deeper into computational and stored requirements the costs really start to shoot up. Networking, device management, storage management, power usage, heat & noise, orchestration…etc

      • Nyanix@lemmy.ca
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        I hear that! Admittedly, I’ve gotten grumpy at myself a few times for “not being able to make something practical,” but I’m reminded when my wife thanks me occasionally for our home server setup (she loves Nextcloud), that it is practical and we use it all the time.

        I’ve got my Wireguard I’m hosting on OCI (they give you 2 free VM instances), and looking to use the second instance to host SearXNG, then have Azure AD for free Active Directory, Home Assistant & Mycroft on Pi’s, and otherwise, hosting local VM’s via Proxmox on some older servers. I haven’t gone too hard into clustering or orchestration yet, though I’m looking to replace most of those VM’s with Docker instances at some point here, reduce compute reservations. Most of my power reduction has been through logical means, not yet through hardware, the costs involved keep me from leaping too hard quite yet. (Hard to drop big money on servers when rent is over half of my income) But I’ll get there! I love seeing how much I can do with very little, so it at least scratches that part of the brain in the meantime :)

      • Nyanix@lemmy.ca
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        I host it on my own server at home :) Low latency and secure. Partially because I don’t trust myself to keep things secure, so the less I can have things publicly accessible, the better I feel

      • the dopamine fiend@lemmy.world
        link
        fedilink
        arrow-up
        18
        ·
        edit-2
        1 year ago

        Vodka.

        Take the Russian word for “water,” essential for survival and comfort, and convert it to the diminutive case, indicating something even more precious to you than life itself.

        Words always mean things.

      • ℕ𝕖𝕞𝕠@midwest.social
        link
        fedilink
        arrow-up
        14
        ·
        1 year ago

        Gotta love cacaphony. I never thought about it until I learned the word euphony, which means “good sounding” from the Greek eu (good) and phone (sound).

        You can see where this is going, right?

        So the Greek kakos means bad, but is cognate with the Latin cacere (to defecate), the word from which we get the informal –if slightly outdated– euphemism “caca” for shit, crap, doodoo.

        So cacaphony, sure, means “bad sounding” but also in a very real sense means “sounds like shit”.


        As a bonus, when I was learning Latin, I was delighted to discover the names Miranda and Amanda mean respectively, literally, good lookin’ and good lovin’.

      • Flying Squid@lemmy.world
        link
        fedilink
        arrow-up
        11
        ·
        1 year ago

        Not a specific word, but it’s fascinating to me how, because of the Norman invasion in 1066, fancier words are of French origin and lower-class words are Germanic. So the animal is a cow, but we eat beef (boeuf) and the animal is a pig, but we eat pork (porc). Chicken was something even the poor ate, so it didn’t change.

        • fubo@lemmy.world
          link
          fedilink
          arrow-up
          11
          ·
          edit-2
          1 year ago

          There are other funny things going on in animal names.

          A “chicken” is a young “cock”, just as a “kitten” is a young “cat”.

          And a “rabbit” was a young “coney” — which rhymes with “honey”.

          But folks got prudish and they didn’t want to talk about cocks and coneys in front of the kids, so words like “chicken” and “rabbit” took over.


          Meanwhile over at the pig farm, how does a farmer call a hog?

          They holler “Soo-ee!”, right?

          They’re speaking Latin. That’s “Sui!” — the vocative form of “sus”, Latin for pig. Folks have been talking to their pigs in Latin for a long, long time.

      • jantin@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        One which you won’t be able to unlearn: “Kid” as a word for a child derives from a word “kid” which meant young goat. We’re literally calling human children “goat children” and it’s not even mocking.

        The same thing happened in Swedish, the common word meaning “boy” or “guy” - “kille” is a shortened “killing” - young goat.

      • 1rre
        link
        fedilink
        arrow-up
        7
        ·
        edit-2
        1 year ago

        Not a single word but equestrian and horse being closely related and both decended from krsos (if you say it out loud you can hear the similar to both horse and latin equs)

      • macrocarpa@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        Threshold.

        In houses with mud floors, the stalks of wheat (thresh) were spread about as a kind of insulator and absorbative. A thresh hold was a block of wood at the entrance which stopped the thresh from getting spread through the doorway.

        This grew to mean the boundary between the house and the rest of the world, to the point of symbolic ownership. When you cross a threshold you are going from one domain to another.

        We now use it to mean a limit, or the how far you have to go before something changes or breaks. Kinda cool.

        The other one is arrowhead. Terry Pratchett wrote a great piece on “ontic dumping”, where we use one word to mean one thing then associate it with another thing and the connection is just automatically known by all.

        So ->

        We know what this means right. Go in this direction, look at this direction, the thing which needs attention is in this direction. There are arrow heads everywhere. On signage, on interfaces, even on the spacecraft which we have sent careening off into the universe. If other species are out there, they might interact with an object which had an arrowhead on it and would have absolutely no concept of what it means.

        Why does an arrow have a head anyway? Because that’s the way an arrow flies right. The pointy bit, which we call the arrowhead, moves in the direction that it’s pointing. Which is bullshit, because if you hold an arrow horizontally then drop it, it goes straight down. And it only flies in that direction if you apply force at one end of the arrow and propel it in that direction.

        But WHY IS IT CALLED A HEAD?

        It doesn’t resemble a head. There’s no body. Heads don’t usually “point” in the direction of travel. Yet we have taken a word that means “the bit that is important”, because we’ve determined that a head is an important thing, and the bit of a thing whxih does the most of the thinging should be called a head.

        It baffles me.

    • Flying Squid@lemmy.world
      link
      fedilink
      arrow-up
      10
      ·
      1 year ago

      Etymology is fascinating. My dad had the full version of the OED when I was a kid (compressed down so that 4 pages fit on 1 page in the volume, but it was still in 2 volumes plus a supplement). I loved it. I looked up the history of words I didn’t know all the time.

    • guyrocket@kbin.social
      link
      fedilink
      arrow-up
      7
      ·
      1 year ago

      Etymology is interesting, I agree. I also find language in general fascinating. You might consider studying some basic linguistics, either academically or via youtube. How language works is really interesting, IMHO.

      • ℕ𝕖𝕞𝕠@midwest.social
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        I in fact have. I’ve always loved language, but it was not until college that I began studying it formally.

        I started learning Lakota, Japanese, and Latin on top of my English and Spanish. And while I dropped Lakota from lack of resources and Japanese because I didn’t get along with the teacher, I stuck with the Latin and considered getting a minor in it. Just having Latin and Spanish to compare side-by-side was fascinating.

        My main degree program was CS, though, and (dating myself here) the main problem in AI at the time was natural language processing, which means all of us in the AI specialization had to learn a lot about phonemes, read Noam Chomsky, and generally become linguistics nerds. That bubble burst my foury year, though, and left us scrambling for another problem in AI to study.

        Since I didn’t end up using either my Latin or my linguistic modeling professionally, I rolled those interests into the hobbies of etymology and her dark cousin, the generation of neologisms.

        • Bluetreefrog@lemmy.worldOPM
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          generation of neologisms

          Ngl, I had to look up what neologism meant, but now I know that it = new words, expressions or usages.

          It fascinates me how fast language is changing. When I was young verse was never used as a verb, as in “today we are versing another team”.

          Or the word “meme” has completely changed meaning in less than two decades. It’s like watch evolution on fast-forward.

      • rockSlayer@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        There are moments where I look into the history of a word, and find out that it has a direct connection to PIE. For the rest of that day, I wonder what the language sounded like or what they called it

    • greensage@lib.lgbt
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      I have a circle of friends that LOVE this. It kinda gets annoying when literally every conversation turns into a discussion on linguistics. It was interesting at first, but too much of a good thing and all that.

  • λλλ@programming.dev
    link
    fedilink
    arrow-up
    52
    arrow-down
    1
    ·
    1 year ago

    Home Automation. It can be as simple as buying a hub and some devices. But, I went the self-hosted route using Home Assistant to give me more control of what it can do.

    I have some automations that turn on a certain set of lights on when the sun sets and off when it rises. It’s pretty simple, but saves electricity because I used to leave my front porch light on 24/7.

    I just set up an automation last night that sends me a discord notification when the laundry machine finishes and the same for the dryer. I can’t hear the beeping because I am always too far from the laundry room. This one has me so excited!

    I’ve seen people automate gardens which seems really neat. Really, your only limit is your imagination. I also just really like having an app on my phone to toggle power to random lights and fans around my house. It helps me get out of bed because I can turn the fan off when I’m cold in bed.

    • penguin@sh.itjust.works
      link
      fedilink
      arrow-up
      30
      ·
      1 year ago

      My favourite one I’ve done so far: I put a motion sensor near where my cat goes every morning when she wants to look outside. This then opens the blinds enough for her to see.

      This works better than a simple timer because the blinds are loud enough to wake us up sometimes and she doesn’t want to necessarily look outside every day.

      • λλλ@programming.dev
        link
        fedilink
        arrow-up
        8
        ·
        1 year ago

        I think it’s a lot more intimidating than it is actually hard. You could get a Raspberry Pi, Alternative, or a Home Assistant Yellow. Then there guides that can get you going in minutes. It’s actually a pretty good time with the latest update introducing better onboarding.

        I am not trying to convince you. But, I don’t want to see anyone scared out either.

    • TheInsane42@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      I’m messing with domoticz, but looking to home automation as well. I got an RF link from a colleague and I’m now managing light via the socket units of 3 mutual incompatible systems and it works great. I’m thinking of combining it with zigbee and see if I can do more nice things, as range is my biggest issue now.

      • λλλ@programming.dev
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        t an RF link from a colleague and I’m now managing light via the socket units of

        I have been waiting on Thread/Matter to be bigger and more adopted before I buy most devices. Everything I use right now is on Wi-Fi (using ESPHome). But, I am in no rush. Just having fun slowly building it out. :)

        • TheInsane42@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I just had the Dutch system Klik aan klik uit (kaku), both the old and the new units. Those 2 versions are incompatible and this way I can use both. I used just the new system, but with adding the old units as well I can now make nicer scenes. (turn lights on in a natural ‘entering the room’ order and turn them off the other way around, mimicking leaving the same room.

          I’m just messing about as well and I don’t want to use wifi, that’s why I’m half looking at zugbee. (And Ikea uses that system, so I guess it’ll be available for a while)

          • λλλ@programming.dev
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            I was worried about drowning out my network with Wi-Fi devices but I don’t want to invest in Z-Wave or Zigbee unless Thread falls through. Here’s to hoping 🤞

            • TheInsane42@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Here it’s just rf433 for now. No need for more (apart from messing around with new stuff). As far as I understand Zigbee doesn’t use wifi, but it can be in the 2.4 GHz band.

      • λλλ@programming.dev
        link
        fedilink
        arrow-up
        6
        ·
        1 year ago

        I am using a Shelly EM to monitor the power usage of two circuits, One phase of the Dryer and the whole circuit for the Washing Machine. Monitoring only one phase of a two-phase circuit makes it inaccurate. But, I just did one phase because I only care to know if it’s off or on.

        I used ESPHome to add it to HomeAssistant and this guide to setup the automation.

    • jefff@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      My people! I knew I was starting to get into it when I built some multisensors and a garage door switch controlled by esp32s. Still haven’t done too many very complex things with automations, basically situational lighting and so on.

        • jefff@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Nah, I just put a relay and esp32 together and connected it alongside the garage door switch (super old school). It sits on top of the opener in a little enclosure. I originally controlled it with mqtt, but later reflashed the esp with esphome.

          • λλλ@programming.dev
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Nothing wrong with that! Cool beans! I haven’t tried either. My garage has too much stuff to hold a car so the door is rarely opened.

    • DishItDash@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      1
      ·
      1 year ago

      I would love to get into HA more, and I have it installed and working on my RPi, but the technical aspects are overwhelming. I’m very techy but I wish HA had a “simple” mode the same way my 3D printing software does. That allowed me to become actually decent at printing at a reasonable pace.

      • λλλ@programming.dev
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I feel like I usually am just pressing buttons on a website. But, I admit it can be a bit confusing…

    • Zonetrooper@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      The Discord notification thing actually is actually a really cool idea. That’s where it feels like it moves from hobby into daily practical use kind of stuff.

      One question I have, if you don’t mind - did the washer/dryer come with some smart functionality, or did you have to do somethin like opening them up and wiring into the electrical line for the beep speaker to sense voltage?

      • λλλ@programming.dev
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        My washer/dryer has no smart functionality. I explained it here but I put a device in my breaker box with a clamp on the two lines and that just sends the current to Home Assistant. I read a bunch before I ever tried it and many people have put vibration sensors in/in their dryers. But, this way seems more reliable.

        I did my laundry 3 hours faster than usual today because I actually knew when it was done. Worth it to me.

  • brokenlcd@feddit.it
    link
    fedilink
    arrow-up
    49
    arrow-down
    1
    ·
    1 year ago

    hardware hacking, it feels like you are trying to solve a weird puzzle in which sometimes even the dumbest things may work, and at the end you have a device you can do whatever you want with.

    i can see though why people may find it tedious.

  • TeckFire@lemmy.world
    link
    fedilink
    English
    arrow-up
    48
    arrow-down
    5
    ·
    1 year ago

    Hypermiling. The act of getting the most gas mileage out of your car. When you get into it, there are an insane amount of factors that play into it all, from driving habits, aerodynamic car mods, engine mods, power usage, tires, wheels, suspension, etc. the rabbit hole is deep, my friend

    • kn33@lemmy.world
      link
      fedilink
      English
      arrow-up
      31
      ·
      1 year ago

      Every time I think about how I’d have to drive to do this, the nicest reaction I come up with is “nah, not worth it”. Also the people that draft semis are stupid mofos.

      • TeckFire@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        ·
        1 year ago

        Definitely stupid, that is the worst way to save fuel.

        Personally, I’m not usually up for getting the best mileage out, but knowing the tips is definitely nice if I know I need to save. Not to mention, the aero mods are beneficial for performance driving too, and it’s a passive thing, which is nice.

      • Rentlar@lemmy.ca
        link
        fedilink
        arrow-up
        6
        ·
        1 year ago

        Yeah, getting savings from being super close up to a semi-tractor trailer is not worth the risk. Stay minimum 3 seconds back (90m or 300ft at highway speeds). On the bright side, a car flattened by a truck will not use any fuel.

        However, pacing with a semi (going at 105km/h or 65mph) from a safe distance behind will still net you savings from not speeding. You can set the cruise control or do whatever fuel saving acceleration pattern you have.

      • QuinceDaPence@kbin.social
        link
        fedilink
        arrow-up
        6
        arrow-down
        1
        ·
        1 year ago

        You gotta leave enough room to react and stick out the side just a bit so you can see in front of it just a bit but also you can stop a lot quicker than them.

        I generally don’t do it with Semis though, and I probably don’t get as close as the people you’re thinking of. If I’m on a long trip I’ll ushally try to find a fifth wheel camper going roughly the speed I want and I’ll set my adaptive cruise to the minimum distance. The campers throw fewer rocks.

        Also if you’re ever drafting make sure to keep an eye on your temperature. Most of the time it should be fine but a hot day and going uphill it could very easily overheat, especially if you’ve done some of the other hypermilling mods like partial grille block.

    • Today@lemm.ee
      link
      fedilink
      arrow-up
      1
      arrow-down
      2
      ·
      1 year ago

      I get so stuck on how miles per gallon compares to gas use per time. I’ve decided that driving faster is better because my car is running for less time.

      • TeckFire@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        ·
        1 year ago

        Almost certainly this is not the case, except maybe in extreme circumstances. My car, for instance, gets approximately 25 miles per gallon average, traveling at highway speeds of 80ish MPH average. If I drop to 70 MPH, I can get 30 miles per gallon.

        This is because the ultimate factors in gas mileage are fairly simple. Your engine RPM will increase fuel, and the higher your speed, the higher your RPM is required to be to put you at that speed. The amount of RPM increase needed to put you at a higher speed is more than the rate of engine time running. In other words, increasing horsepower requirements is more costly than engine runtime requirements. You can leave an engine idling for an hour and use less than a trip a few miles down which may take only minutes.

        That said, while going slower saves gas, the biggest part will be the acceleration/deceleration parts of it. Accelerating takes much more power in a short amount of time to get your speed up, so the faster your acceleration, the more your RPMs will spike, and the more your fuel consumption is. Deceleration too. Letting your engine coast, or leaving it in gear while not accelerating, means your engine is using little to no fuel and yet is still rolling forward. The more you can take advantage of this, the less fuel used.

        In the case of high acceleration and harsh braking, you turn a lot of energy into motion, and then convert that energy to heat for the brakes. If you turn a little energy into just enough motion to get you there eventually, and then let the engine slow down until it almost stops as you arrive, you waste the least energy. Ideal real world is somewhere in the middle.

  • BodePlotHole@lemmy.world
    link
    fedilink
    arrow-up
    39
    arrow-down
    1
    ·
    1 year ago

    Musical synthesizers.

    Historically it is a hobby that’s had a high financial barrier to entry.

    But the past decade has had a huge flourish of affordable and unique synthesizers and related musical equipment show up on the market. A lot of this stuff can be a TON of fun regardless of your musical knowledge/skill level. A few days on YouTube and a hundred bucks and beginners can be making their own music, with or without a computer with audio software.

    It starts simple, and can go to endless depths of creativity.

    • paysrenttobirds@sh.itjust.works
      link
      fedilink
      arrow-up
      10
      ·
      1 year ago

      I super agree! I helped my daughter attend a zoom class on software based synths during covid, and had so much fun fiddling with making weird sounds and loops within loops. I forget the name, algorithm or something? Pd?. And you can get kits to solder up little real life circuits to string together, each one adds a whole dimension to what you can make the sounds do. Easy to get into and incrementally build on.

    • ImpossibilityBox@lemmy.world
      link
      fedilink
      arrow-up
      7
      ·
      1 year ago

      To anyone that might be interested in this you should check out VCV rack. It’s a free software emulation of modular euroracks. They even have software recreations of classic modules that would be considered standard for most racks.

      Obviously this route lacks the major aspect of physical interaction and feedback which many say is a large component in there enjoyment of the hobby but you can still learn all the basic and experiment to find out if it’s something that grabs your interests.

      Fair warning: If you do catch the bug there will be a point in time where you start trying to justify spending $400 on a single LFO module. This is normal. Don’t be afraid.

  • chrizzowski@lemmy.ca
    link
    fedilink
    arrow-up
    36
    ·
    1 year ago

    Film photography. With smartphones having taken over the roll of point and shoots and covering the majority of people’s photography needs, it’s quite a different experience breaking out a half century old camera. Everything is more tactile, your shots are finite, and the result is a 100% determined by your decisions. Different films produce different results, and if you get into developing your own film you get to play mad chemist in the bathroom.

    There’s a learning curve, but if you’re already into photography and understand the basics it’s really not that hard. Labs still exist to develop for you if you’d rather not go down that rabbit hole. The results may surprise you!

    • ImpossibilityBox@lemmy.world
      link
      fedilink
      arrow-up
      8
      ·
      1 year ago

      I started to get deep into film photography but when I realized I was researching hospital grade HEPA filters so I could put a darkroom into the bedroom closet I decided I needed to take a step back.

      I love film photography and the fact that I recently moved a very short distance from the Kodak film plant in NY is slowly drawing me back into it.

      I wonder if the local community college has a dark room I could rent.

    • limelight79@lemm.ee
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      I mostly shoot with a DSLR (or did, the pandemic has apparently killed a lot of my enthusiasm for that particular hobby). But I have occasionally picked up a film camera just to play around. It always takes me about half the roll to stop checking the results on the display on the back of the camera…

      • chrizzowski@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        It’s like the odd time I drive an automatic after decades with a manual … always mashing the floor and popping it in neutral by accident.

  • Twitchy1@lemmy.dbzer0.com
    link
    fedilink
    arrow-up
    33
    ·
    edit-2
    1 year ago

    Recently joined an on-road RC racing club.

    Gets a lot deeper than I ever thought it could. The mechanics of making a car go around turns better/faster gets very in depth. Lots of trial and error. Race every 2 weeks so tons of time to experiment with adjustments between race days.

    Ages range from near 80 to 10… everyone out just having a good time and helping each other for a few hours. During winter, Florida busy season, we have 50+ people racing 5-6 different classes in a public parking lot.

    Started with a used off the shelf car for $75 from a club memeber 5 months ago… now building competition grade kits and put up shelves in the bedroom for all 7 of my cars. Almost all used for VERY cheap that just needed a bit of love to be competitive again.

      • Twitchy1@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        I have not tried that yet. I did nitro off-road bashing years ago and have dabled in rock crawling with a little SCX-24. There’s a local indoor track with a drifting course… not real fond of management otherwise I’d race in the air conditioning a lot more.

        • M0RPHAUX@feddit.de
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          That makes sense. How did you like rock crawling, also about the small one? I’m thinking about getting into that!

          • Twitchy1@lemmy.dbzer0.com
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Its different, very slow. I figured it would be a little more relaxing but definitely not the case. Anxiety builds trying to figure out ways to climb without flipping repeatedly. Florida is flat and mostly sand so there’s not very much in the way of natural places to run it. I resorted to taking rocks off of construction sites to make a small course in the corner of the yard.

  • BlinkerFluid@lemmy.one
    link
    fedilink
    English
    arrow-up
    27
    arrow-down
    1
    ·
    edit-2
    1 year ago

    yoyos.

    So competitions are just a guy with a yoyo?

    1A, one yoyo, typically unresponsive for loose tricks

    2A for two-handed, looping tricks with responsive yoyos

    3A for two-handed unresponsive yoyos

    4A for off string (yoyo not tethered)

    5A for Freehand (string tethered to a counterweight)

    AP for artistic performances, regardless of the competitive style.

    bonus trivia: Steve Brown, the creator of 5A, was on an episode of Wifeswap.

    • Flying Squid@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      My favorite thing about yoyos is that they were sort of used as a deadly weapon in the Philippines. I say sort of because they were heavily modified.

    • smort@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      There’s an episode of Netflix’s “We Are the Champions” on competitive yo-yo, if anyone wants a 30 min primer. (It’s also just good entertainment)

    • Flying Squid@lemmy.world
      link
      fedilink
      arrow-up
      33
      ·
      1 year ago

      My wife is textile-obsessed. She started with crocheting and knitting, but this is basically her minus the ending:

        • Flying Squid@lemmy.world
          link
          fedilink
          arrow-up
          10
          ·
          1 year ago

          She’s definitely enthusiastic. She spins when we watch movies, she knits when we go out to see friends or wait at the doctor, she weaves on her schacht inkle loom sometimes, she dyes fiber, the whole gamut. The only reason we don’t have a sheep is because the dog would endlessly harass it.

      • frickineh@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        1 year ago

        This is me with embroidery. I started out making a couple of friendship bracelets in June. And then I thought, “Hey, now I have a bunch of extra floss, why don’t I try to embroider something?” So I bought a couple of kits to practice, and now like 2 months later, I have a full box of floss including some fancy shit from Japan, a boatload of hoops, and piles of colored cotton. I moved from printing other people’s patterns to customizing them in like, a week. I created my own monster. And now my favorite supply store has patterns for tiny embroidered felt animals so I’m starting a set of dinosaurs.

        The real issue is what the fuck do I do with all this stuff I’m making. I don’t want to monetize it and I’m not really good enough for that anyway, but it’s gonna be a problem soon.

        • Flying Squid@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          1 year ago

          My wife is there with you too. She has a huge toolbox full of embroidery floss. And you should see her “craft room,” which is pretty much our house’s dining room.

          • frickineh@lemmy.world
            link
            fedilink
            arrow-up
            5
            ·
            1 year ago

            I like her, she seems cool. I purposely built a crafting area with a huge closet when I finished the basement. At a certain point, you just have to accept that the crafts have taken over your life and home.

            • Flying Squid@lemmy.world
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              There was one thing I had to put my foot down on finally. She had a loom that was the size of a washer and dryer and she used it maybe a couple of weeks a year. Eventually I had to insist she get rid of it and she agreed. Now she has a couple of small looms, which is fine.

    • Papanca@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      ·
      edit-2
      1 year ago

      I taught myself using videos and became - over years - an advanced knitter. My goal was; i want to be able to design and knit anything i want to, and i achieved that goal (not always flawlessly, but still). It’s fun, colorful, the knitting communities are great, and you will boost your self esteem, because even though you will make tons of mistakes (even at an advanced level), you will also learn how to fix them, or hide them. Edit to change teached into taught…