cross-posted from: https://sh.itjust.works/post/53581443
YSK You can count past 1,000 on your fingers by using binary, instead of just 10
With just one hand, you can count to 31, and with both hands you can reach a whopping 1,023. This is because the placement of the held up fingers matters, rather than the amount.
It can be very useful in everyday use, being able to count to huge numbers when you don’t have your phone or pen and paper nearby.
4? What do you mean?
22 will shock you
It can be very useful to know how to count to 4 this way, especially as a signal to other drivers regarding your level of displeasure
You can rate their driving on a 0-10 scale using this handy system
We can go further, you can rate them from 0x00 to 0x1F
Don’t you mean from 0x00 to 0x0A?
No, you have five fingers
132 also feels like a good signal number.
I developed this skill at a young age because I grew up in a nerdy family
It’s unfortunately only really useful as a party trick and not super practical
Beware of the 132.
!🖕🖕!<
clever
I can count to 21 if I take off my shoes and pants
Though there’s a bit of a delay counting to and back from 21.
Big numbers are cool, but you can actually count to 100, not 10, in decimal, by using two hands.
On your right hand:
Pointer = 1
Pointer + Middle = 2
Those + Ring = 3
Those + Pinky = 4
Thumb alone = 5
Thumb + Pointer = 6
Those + Middle = 7 Those + Ring = 8
Those + Pinky = 9Now hold up your left hand and stick your pointer finger out. Put all right fingers down. That’s 10.
So I’ve shown you how to count to 10 on one hand. The other hand is the tens place, so by having two hand signals that go up to 10, you have two digits and therefore 100. And once you know the trick, it’s super easy to read, too. If you’re gesturing to someone else, reverse the hands so they can read it left to right.
As long as we are going that far, maybe we should stick to a system that if already in use
So growing up I was taught ASL. And I can tell you, knowing how to count high on a single hand REALLY helped in my lower grades for math. I used to see kids put down their pencil to keep counting, and I’d be counting on my fingers with one hand. Very practical.
And when you get older, if you and your friends know ASL, you can sign across rooms (like noisy bars). Just throwing that out there.
Cool! I imagine ASL goes higher than 20? Because if it didn’t, the system I learned wins since it can go 0-100.
I think the one I learned is easier to learn/memorise, too.
But since we’re talking about counting/doing math on your fingers, I’m not sure which is easier. That said, the one I learned was from a YouTube video about mental calculations. They said that was how they counted really fast. Still subjective, though.
ASL can count as high as you need to, it gets kind of tedious after about a 999, because of all the place markers that need to be added in (like manual counting, or spelling out a number on a check), but one can sign up to 999 with a single hand. for numbers up to 99, it’s more or less using the chart above. For everything after that you mark the hundreds place with the letter C and then go on the rest of the number (476, would be signed 4 C 76). Beyond that, it’s just a matter of adding on the place value signs for “THOUSAND”, “MILLION”, etc. (which are two handed signs) so, 456,789 would be signed as 4 C THOUSAND 56 7 C 89.
The exception to this would be strings of numbers, like phone or room numbers, where you sign them much like how they’d be spoken. So when directing someone to room 235, you’d just sign 2 35 (the concept of hundreds isn’t really important here, because in most cases, the leading 2 just means the room is on the second floor).
Edit: ASL is very visual so here’s a link (with the caveat that there’s variations in signs between signers/ regions, so online stuff may be different than what folks in your area are using)
Uhh, 100 uses 3 digits.
True.
But, two thumbs up = 100 and no fingers up at all = 0.
It’s like rolling “1d100” in D&D. Unless you actually have a 100-sided die (a ball with a weight in it so it eventually stops with a number up), you roll 2d10 and declare in advance which one is the tens place (some have a zero at the end of each digit, so that’s tens by default). That gets you 1-100 with no zero option.
So, you’re right that two digits have 100 numbers, 0-99. The dice system has 100 numbers, 1-100. The hand system I described goes 0-100. So technically one of those is a 3 digit number. But, the system allows it and doesn’t (easily) allow any more 3 digit numbers.
two thumbs up = 100
So how would you distinguish this from 55?
Yeah, I think they’re confusing themselves a little bit. Which is unfortunate because it’s a pretty good system actually, it just counts 0-99 not 0-100 like they’re claiming.
Heh… yeah. So maybe it can only go to 99… /shrug
you can also count to 12 on one hand, by counting the segments on your index through pinky fingers with the thumb. Fingertips are 1-4, middle segments 5-8, lower segments 9-12.
Why stop at binary? You can do ternary with three positions for each finger: extended, bent, curled.
Yeah… but make sure to turn away from people when reaching 4, 128 and 132
(Probably also at 644 and 645)
Tap for explanation
🖕
Instructions unclear: accidentally cast clone jutsu
OK, but should I?
Yeah, everybody please respect the honor system and use decimal for numbers up to ten, binary for numbers up to one.
If you absolutely have to count to e.g. 20 in decimal, just count to ten twice.
In binary, I can even count beyond 1,000,000,000 using my 1,010 fingers
You only need 30 fingers to count beyond 1 billion in binary. 2^30 = 1,073,741,824. The power of exponents 🤪
Woosh lol
I can count to 22 if I take off my socks and my top
That’s why it’s called digital.
You will hurt your tendons trying, but you can.
No? I’ve been counting like this for like 20 years
Maybe you’re used to it. Putting up just my ring finger is hard and uncomfortable
I don’t try to put my pinky all the way down, the difference between a 1 and 0 on that finger is about 90°, though it rolls a bit depending on the other fingers. As long as you can tell the difference between up and down, you don’t have to be that strict about the exact positioning
