I’m currently stuck in a used bedroom infested with flies at the time of writing this.

My parents have decided to block internet whenever I try to move my PC back upstairs. Asking them wouldn’t work out because it usually falls on deaf ears.

A few days ago, they moved it without my knowledge, and I noticed that my folding table was gone from my bedroom.

I’m planning to set it back up again, but they might turn my internet off when they catch me. I’m trying to get a few ideas and create a plan to move my PC back upstairs.

I found a few tutorials on getting through parental controls, but the tutorials are done on Windows and parental controls are set up using TP-Link.

  • Tolookah
    link
    fedilink
    arrow-up
    57
    arrow-down
    1
    ·
    1 year ago

    Depending on the type of flies, an open container with apple cider vinegar (not white vinegar) and a drop or so of dish soap will lure flies in and they will drown. It helps with smaller flies.

    As for the Internet, that’s tough, no idea.

  • gerbilOFdoom@beehaw.org
    link
    fedilink
    arrow-up
    43
    arrow-down
    1
    ·
    edit-2
    1 year ago

    So, you can work around these things but you’re going to run into problems if you do:

    -If you reset the router, you need to restore the original password else they’ll know

    -if they notice you using these devices when you wouldn’t have access, they’ll remove them further from your reach. Possibly permanently.

    -If detected, a larger conflict is likely to be escalated. This includes a loss of the benefit of the doubt in the future.

    I’d suggest that this is not the battle to fight. They’re likely fighting your apparent obsession with tech. Let them have this battle and continue your fun later.

    Try the Stormlight Archive, wheel of time, or mistborn books. Maybe the redwall books if you’re younger. Fun and focus can still be had without a computer!

  • Still@programming.dev
    link
    fedilink
    arrow-up
    29
    ·
    1 year ago

    there’s two possibilities for this wifi blocking:

    1. it’s setup to only allow whitelisted devices, in this case you’re fucked, only option is to pretend to be some whitelisted device
    2. it’s a blacklist, in this case changing your mac address will make you appear to be a new device, anyone monitoring the device list could see the unknown device appear
    • rufus
      link
      fedilink
      arrow-up
      21
      arrow-down
      24
      ·
      edit-2
      1 year ago

      I know nobody likes a know-it-all. But FYI: The current suggestion is to call these allowlist and blocklist. I’m not sure how they’re called on the router. The terms have been out there for a few years already.

      • Tuss@lemmy.world
        link
        fedilink
        arrow-up
        7
        arrow-down
        1
        ·
        1 year ago

        One question that I have though is where does it end? The word blacklist from an etymology standpoint has got bothing to do with race. So where do we disregard the historical context of the meaning of words because people take it out of context and it makes them feel uneasy?

        I am not saying that I am against using blocklist instead of blacklist. I am just asking. Where does the history anfd usage behind the term supercede the out of context hurt feelings?

        • rufus
          link
          fedilink
          arrow-up
          1
          arrow-down
          4
          ·
          edit-2
          1 year ago

          Well, what do you think? I personally can’t see any problems with other words in my router like “Static IPv4 Routes”, “DNS Settings”, “Exclude interface”, “Static Leases”, “Port Forwards”. And I don’t know of any substantial grey area. So I don’t share your fear of things getting out of hand. Please correct me if I’m wrong.

          I think the words do not originate from something connected with race. It’s just that it’s the old stereotype of white = positive/good; black = negative. And these terms are technically inferior (because less descriptive) and if it reminds someone of their skin color, I’m okay with re-thinking things. Mind: this has been my impetus for questioning the terms in the first place, not the reason or argument to change them.

          I don’t like black and white thinking anyways. People always want simple categories, want to know if something is good or evil. Things have to be clear opposites. And in real-life most things are somewhere in-between and if you really think about it, it’s often not either or. And having the same concept everywhere just reinforces that kind of stupid thinking in categories and in opposites. So it automatically resonated with me once people suggested to change things. Also I might for example like to take a walk in the cold breeze of the night and enjoy the concept of dark/black and everything is completely arbitraty.

          It doesn’t even work for this simple example in the clear and mathematical world of computers. There is the black and white, but you also have greylisting. Everything depends on context once you go into detail. Maybe you accept some kind of network packets from internally, but drop them once the originate somewhere outside of your own network. And your firewall will use yet other terms like ACCEPT and DROP.

          And that’s where I think “it ends”. Never. I’m a progressive. I’m ready to advance things forwards once there is a better proposal. I judge things based on facts. I care about consequences. I’m ready to listen to people on a case-by-case basis. I won’t be butthurt because ‘omg, woke people want to change my language, and language should never change’. I like to argue about facts. They’re either true or false and you’re free to voice your objections. We gather the new ideas and then do a cost-benefit analysis. If you’re smart, you’re taking this as a basis to make a decision and go with it.

          And since you’re asking. I’m also a proponent of changing master/slave, because for some people these words really have a negative connotation to them. And it’s more or less a no-brainer to slowly phase them out and replace them with something like primary/secondary or main/worker or replica. Interestingly enough, this really has something to do with race in the US, but preceeds Black Lives Matter. I do not know of any other controversies. Feel free to contact me if you see any issues with terms like ‘grey area’ or ‘blackout’, ‘zombie processes’ or ‘kill children when the parent process died’. We can discuss this but my main concern is to move forward and create something. I’m ready to listen to proper arguments. I’m not part of the conservative people who want to argue all day and want to know what happens in this or that hypothetical scenario. If there is an actual problem with a technical term, please approach me and I’ll listen. Otherwise please keep quiet.

          Is that a sane approach? Do you think those are valid arguments?

          (I’m really okay with it. I have to abide by style guidelines which say how many spaces or tabs of indentation in my code and where to put my return statement. I can live with another style guideline that says avoid this word and replace it with a more appropriate term. In my eyes we should have a few funny inside jokes that are politically incorrect. It’s important not to be dead serious all the time. But most of the time language should be precise and effective.)

      • papalonian@kbin.social
        link
        fedilink
        arrow-up
        22
        arrow-down
        19
        ·
        1 year ago

        Are people really trying to make blacklist and whitelist a race thing? Good Lord.

        Are we going to start referring to cables as having female-identifying ends and male-identifying ends? Are USB-C cables non-binary?

        • Arthur Besse@lemmy.ml
          link
          fedilink
          arrow-up
          9
          arrow-down
          1
          ·
          edit-2
          1 year ago

          That discussion happened a few years ago and most actively-developed projects using those terms have stopped or are stopping.

          Also, btw, while hermaphroditic connectors have always been a thing, in the USB world cables tend to have male connectors on both ends regardless of if they’re A-to-B, A-to-C, C-to-C, or have one of the many B variants.

        • ASeriesOfPoorChoices@lemmy.world
          link
          fedilink
          arrow-up
          6
          arrow-down
          1
          ·
          1 year ago

          Cables: that’s already a thing.

          However, in this case the alternate name is more obvious and probably more appropriate.

          Re: naming: I agree with you since it has nothing to do with race, any more than black/white has to do with race in chess.

        • Zippy@lemmy.world
          link
          fedilink
          arrow-up
          12
          arrow-down
          8
          ·
          1 year ago

          The world is burning. Too much plastic in the ocean. Serious war in Europe. And whitelist/blacklist is somehow a concern. We are doomed.

        • populustree@lemmy.blahaj.zone
          link
          fedilink
          arrow-up
          6
          arrow-down
          5
          ·
          1 year ago

          Are we going to start referring to cables as having female-identifying ends and male-identifying ends? Are USB-C cables non-binary?

          hi, nonbinary person here

          no, you fucking doughnut! just say plug/socket or port/plug or keep calling it M/F, there are thousands of better fights to fight than this, and if anyone says otherwise, let them yell at the clouds alone.

        • kate@lemmy.uhhoh.com
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          3
          ·
          1 year ago

          Are USB-C cables non-binary?

          literally yes?? what binary gender does a cablehave???

        • Rachelhazideas@lemmy.world
          link
          fedilink
          arrow-up
          4
          arrow-down
          10
          ·
          1 year ago

          No one is trying to ‘make it a race thing’. It was already ‘a race thing’ and we are actively trying to un-race it.

          You and I being unaware of the partially racial origins of these terms (yes, I just learned about this too), doesn’t erase the implications of these words and how it can be hurtful to some people.

          There’s no such thing as anti-wokeness, only willful ignorance. We can be better people than that.

          • glue_snorter@lemmy.sdfeu.org
            link
            fedilink
            English
            arrow-up
            6
            arrow-down
            2
            ·
            1 year ago

            Racial origins of those terms? Citation needed.

            Black and white, in the sense of good and evil, have had their connotations for a fucking long time, whereas black and white to describe skin colour are relatively recent etymologies. I’m pretty sure that Romans didn’t call themselves “white” or others “black”, for example.

            I’m willing to be taught, but this sounds like bullshit to me.

            The etymology being wrong doesn’t mean that we shouldn’t drop freighted terminology, I just don’t want false justification. Bullshit is never a valid reason to do something.

      • rufus
        link
        fedilink
        arrow-up
        4
        arrow-down
        12
        ·
        edit-2
        1 year ago

        Wow. Just wow. I’m deliberately not replying to any single comment. I didn’t know this is such an emotionally charged topic. And I don’t like it.

        I know the relation to ‘race’ and that being the cause for people arguing about it a few years ago. But isn’t it a better term? If I want to block something with my firewall… I’m putting it on the blocklist (or deny-list). If I want to allow something… It’s on the allowlist. Forgive me, maybe I’m a nerd and I don’t care so much about the etymology. Why bring in (random) colors? Can I please use the term because I think it fits better?

        And the discussion immediately shifting to connector genders… Well. Yeah I get it, it’s a funny subject. And comparing something with protruding parts to a penis is funny. Also for me… But you people immediately having trouble with the terms, (rightfully) bringing in hermaphroditic connectors. And there being several disctinct/binary ones but with ambiguities so that it’s more convention than protruding bits in case of electronics… It just shows naming connector sides that way is a stupid idea. It get’s you most of the way but after that, it just confuses people and stops describing anything useful. I’m a bit unsure about this. Because it’s one of the few accepted penis jokes you can make at work or a conference (at least innuendo). And I don’t want to lose all of them. But it has never been a good ‘analogy’ in the sense that it is a good descriptive way to name connectors.

  • lorty@lemmy.ml
    link
    fedilink
    arrow-up
    23
    ·
    1 year ago

    Even if you did, what would you do when your parents saw you using the internet after they’ve cut you out? There’s no special orogram for that.

  • Landmammals@lemmy.world
    link
    fedilink
    arrow-up
    21
    ·
    1 year ago

    Clean the room that your computer is now in, and use the computer in that room. You don’t need the computer to be in your bedroom.

  • Thisfox@sopuli.xyz
    link
    fedilink
    arrow-up
    23
    arrow-down
    2
    ·
    1 year ago

    That is a weird whinge. Good on your parents for putting their foot down. If you show them some responsibility they will show you some trust.

    What on earth is a used bedroom? Do you not know how to clean your room?

  • Solivine@sopuli.xyz
    link
    fedilink
    arrow-up
    21
    arrow-down
    1
    ·
    1 year ago

    Why are they stopping you move your PC upstairs? This doesn’t make much sense. They allow you to use it downstairs?

    • girl@lemm.ee
      link
      fedilink
      arrow-up
      30
      ·
      1 year ago

      I had strict parents growing up, they probably want the computer in a visible location so they can make sure OP isn’t watching porn or something

    • hellweaver666
      link
      fedilink
      English
      arrow-up
      20
      arrow-down
      2
      ·
      1 year ago

      As a parent myself I often have to pause my kids internet because modern games and social media are addictive. I tell my kids it’s time to get off (because bed time, family activity, meals, etc etc) and they’re stuck in that “just one more” mind set. They can’t see that they’re addicted and we need some way to break the connection. We give them 30 minute warnings and remind them all the way down to zero and they still won’t shut down. If the parents are enforcing public usage it’s likely because the kid has been caught behaving inappropriately in private.

      To the OP, maybe instead of trying to get around your parents rules, listen to them and understand why. Show some responsibility and they might start to trust you.

  • Tutunkommon@beehaw.org
    link
    fedilink
    arrow-up
    18
    arrow-down
    2
    ·
    1 year ago

    What is a “used” bedroom? As for flies, buy a pack of fly strips for a couple bucks. That should handle your introductory list of “oppression”.

    All you are going to do is prove that your parents are right to not trust you. Consider why they don’t want you to have it in your room? What happened that they won’t allow it? Or maybe you need to prove you can be trusted with it first?

    If this was one of my children acting in open defiance like this, the next step would be locking the PC in a closet for a month, and then trying again with it downstairs. To allow them to earn trust back.

    This is not the way.

      • Tutunkommon@beehaw.org
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        If the parents took the computer out of the room, told OP that they could not put the computer back in the bedroom, and used parental controls to limit internet access, I would consider moving it back into the bedroom anyway and bypassing the limits as “open defiance”.

  • TexMexBazooka@lemm.ee
    link
    fedilink
    arrow-up
    16
    arrow-down
    1
    ·
    1 year ago

    It sorta depends on exactly how the blocking works but it’s most likely by MAC address. You can spoof this address through windows I believe, which will make the network view you as a different system.

    This article provided a few ways to do this: https://www.digitalcitizen.life/change-mac-address-windows/

    That would be your path of least resistance to dodge network blocking, assuming it’s being filtered via MAC address

    • yeehaw@lemmy.ca
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Could it be Mac filtering though? Sounds like they’re implying that only when the computer goes upstairs it would be blocked.

      • TexMexBazooka@lemm.ee
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        My interpretation is that the parents are manually putting blocks in place after the device is moved. Of course if that’s the case and they’re actively managing this, you can get around it but they’ll notice eventually either way.

        Without knowing more specifics it’s hard to say. If it’s over a wireless network, using consumer grade equipment, Mac filtering is the option most people have out of the box. They can enable/disable it from a phone if they’re using TP-Links app.

        Anything else involves VLANs and firewall rules, and if that’s the case OP is out of their depth

  • colonial@lemmy.world
    link
    fedilink
    arrow-up
    14
    arrow-down
    3
    ·
    1 year ago

    This is what we in the business call a “skill issue.”

    There are ways around it, yes. But none of them are plug-and-play unless you’re lucky, and a reliable solution will require a combination of technical ability, stealth and social engineering.

    Just read a book my man.

  • RovingFox@infosec.pub
    link
    fedilink
    arrow-up
    12
    arrow-down
    3
    ·
    1 year ago

    What I would personally do is buy a device that can connected to wifi and hotspot at the same time. This can be a raspberry pi or a wifi router range extender.

    I would set the name and MAC address to match a device that is constantly connected, a smart TV or Alexa maybe.

    Then I would use this device connect to the internet.

    Everything works as usual and for those who monitor the network via Router settings, nothing looks different.

    Have fun pulling risky moves and maybe also learn something out of it.

    • One of these is $40 USD, and can be configured to provide a VPN for all through-traffic. They’re small, portable, discrete, and cheap. I love these devices. The slightly more expensive model gives you WiFi 6. They were designed as portable bridges for insecure locations, creating a private LAN; they are powered by USB-C, so could be run off a laptop.

      This would be the first thing I’d try.

    • glue_snorter@lemmy.sdfeu.org
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      1 year ago

      Deliberately duplicate a mac address, and worse, deliberately pick a device that’s definitely going to be online in the same network segment?

      At first I thought you were either trolling or profoundly ignorant.

      Then I remembered that wifi is CSMA, and thought, hang on… is this actually a genius idea? Has this user come up with a hack that no-one else knows about? So I tried it.

      It doesn’t work. I couldn’t even join.

      So no, you are either trolling or ignorant.

      Hers some discussion and links, for anyone interested: https://superuser.com/questions/1132935/duplicate-mac-on-a-wifi-network-problems

      • RovingFox@infosec.pub
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        I think you are missing my point. The “pretending” device connects to router, while the “original” device connects to the pretending device. The 2 interfaces that share the same MAC don’t connect to the same network.

        The user also conncets to the pretending device. to hide their access to the router.

        • glue_snorter@lemmy.sdfeu.org
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Ahhh, thanks! Please excuse my error - I am attempting to perform computation using a kilo of wet squidgy protein and fat.

  • zxqwas@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    Check if the password and user name is the default for the model. Google the model or see if there is a sticker on it.

    There is usually a factory reset button. Again Google how to do that for your model. Then you can log in with the default password. It will also reset every other setting too so if you lack the knowledge to reconfigure everything else they will notice.

    If either of your parents is better than you at IT I advise against trying. They will notice.