Menschenauflauf könnte besser klappen.

It should be noted, that the Model S is also a larger vehicle. The Model 3 is much closer in weight, lenght and offers also 5 seats and a similar amount of trunk space. But yes, in general, electric vehicles are heavier thanks to the weight of the battery. roughly ~300kg extra. (yes, the pack weighs even more but it also serves a structural purpose in many EVs.

more than a Range Rover.

Really depends on the model. A base model Evoque yes, a Defender is pretty much in the same weight class.

Klar, ein Glas ist jetzt kein Thema

extra weight makes them far more dangerous in a crash

If this would be really a concern to many people we should also rule out SUVs and the like. They weigh often over 2t. A Tesla Model 3 weighs 1.7-1.9t.

Sich jetzt 2-3 Liter Milch oder Orangensaft reinzukippen ist vermutlich aber auch keine gute Idee. Beides enthält nicht gerade wenig Zucker, bei Milch kommt noch Fett dazu und bei O-Saft einiges an Säure. Klar, ein Glas ist jetzt kein Thema, man sollte aber jetzt auf keinen Fall auf die Idee kommen, dass man sich mit literweisen Konsum was gutes tut. Wasser hingegen ist recht entspannt (bis so ~4l, dann kommt tatsächlich der Mangel an Salz und Co zum Tragen)

Früher war es möglich das irgendwie hinzubekommen, aber scheinbar hat Google geschafft es einfach zu machen. Theoretisch solltest du über diesen Link (https://myaccount.google.com/language) Englisch hinzufügen können und dann sollten keine englischen Titel mehr übersetzt werden. Werde es mal ausprobieren.

To my knowledge the first suggestion (that didn’t work) for me, is to export using the export option of the vault. This is disabled for business users.

WTF. Why? This would make me want to switch even more and I would make sure to never be their customer again.

Are you also using Powerline? This can cause all kinds of wanky issues.

Mhmmm… Punsch!

So wundervoll wie die automatisch übersetzten Videotitel auf Youtube und einigen Pornoseiten.

The Seagate Ironwolfs 18TB have a Workload Rate Limit (WRL) of 300TB/year, as do some WD models. Unlike SSDs this WRL includes not only writes but reads as well. (page 2, end) If you do a monthly scrub you already have 216TB of reads so it can be safely assumed that a lot of customers blow well past these numbers. This limit is in use since the 2TB drive area and simply does not fit 9x larger drives. ServeTheHome talked about this years ago.

Bevor man so einen Wechsel macht, immer ein vollständiges Backup machen. So kann man bei Bedarf auch schnell wieder zurück, wenn das neue System doch nicht so das gelbe vom Ei ist.

They most definitely can read triple layer discs as they are commonly used for 4K Blu-rays. And when a drive can read TL-Blurays it most likely also can read QL-Blu-rays just fine. However, those are rare so I would suspect a 2x TL release.

A single Quad layer Bluray could fit the entire game, but not a ton of PC users have an optical drive, much less a Bluray capable one. A microSD card or USB drive might be more viable these days. A 128GB costs less than $10. When you want to stick to DVDs you would need either 27 (DVD-5), 15 (DVD-9) or 8 (DVD-18). Multi-DVD releases are definitely a thing. Star Wars Battlefront comes on 4 discs. I suspect they would opt for a DVD-9 release as this allows you to print artwork on one of the sites and you likely need a few extra discs as you cannot use all of the storage for data. So we talk about a 16-18 disc release. ~22mm (7/8 inch) of DVD goodness.

It actually does. Blurays go up to 128GB and the game needs 125GB.

I will just paste my standard procedure when I onboard any new (or used) drive: Everybody has their own skin care HDD check routine. This is mine:

I first check the SMART status with CrystalDisk, after this a short smart test, full surface check with Macrorit, full h2testw run, CrystalDiskMark, and then I check with CrystalDisk once again if anything besides power on hours did change.

Will take some days for a large drive but in terms of work hours we talk about less than 5 minutes and it covers pretty much anything without being too excessive.

Kommt auch drauf an wie und was man macht. Wenn man passgenaue Teile braucht, und man vorab nicht alles perfekt ausmessen kann, stelle ich mir das recht nervig vor 1 duzend mal ins FabLab zu fahren, oder dort ein paar Stunden rumzuhängen um jeweils zu drucken und zu testen. Daheim kann man in der Zwischenzeit halt eigentlich immer was anderes machen. Und kommt auch ein Stück weit auf das Budget an. Wenn man ~1.000€ über hat, gibt es einige Drucker, die einfach drucken, ohne, dass man groß rumdoktern muss. Ist für viele aber mit Sicherheit schwer zu rechtfertigen, besonders wenn der Drucker nur selten genutzt wird. Wobei man tendenziell auch mehr Anwendungen findet, wenn man so was da hat.

Removing CPUs and RAM will also decrease its compute power. Disabling features also will likely remove some of the enterprise features like IPMI. You might end up getting the worst of both worlds - Not a ton of PCIe, few cores and RAM - but loud, and still pretty power hungry.

These days though, there really isn’t any reason not to use TLS, it’s just so easy. Exactly. If someone can be bothered to do some minimal maintenance every few years you can assume the website is already compromised, outdated, or kinda shitty.

Yes but also expect to pay more. IIRC they will honor google’s pricing for the first year but afterward you more likely than not have to pay more. And you might lose some features you use.